|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-01-2019, 12:57 PM | #1 |
Not Yet Wild
Join Date: Mar 2018
Posts: 28
|
Moving 12V Accessories to Tow/Run Switch
I have a working 12V reducer that is currently tied to the on/off dash switch. I’d like to move it so that it works when using the town/run to run position instead. Ideally, tow/run set to “run” and dash switch set to “off” will still give me my accessories. Where should I move my 12V accessory panel positive/negative leads to accomplish this?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-01-2019, 09:57 PM | #2 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,226
|
Re: Moving 12V Accessories to Tow/Run Switch
Connect it to the hot side of the key sw. That's the other terminal on the sw where it is connected now.
|
07-03-2019, 10:43 AM | #3 |
Not Yet Wild
Join Date: Mar 2018
Posts: 28
|
Re: Moving 12V Accessories to Tow/Run Switch
|
|
|
Similar Threads | ||||
Thread | Forum | |||
moving f/r switch | Gas Yamaha | |||
Moving the Run/Tow Switch | Tomberlin | |||
Hooking up accessories through the ignition switch ? | Gas Yamaha | |||
Moving my key switch | Electric EZGO | |||
moving the forward and reverse switch | Electric EZGO |