|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-09-2020, 10:37 AM | #1 |
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
G22 fsip 221-48vspeedey install
I installed the FSIP motor last night. There were no issues and it fits perfectly on the G22 as well. I will say the key is to take the shocks loose at the top and use a jack to jack the frame up a couple inches off the suspension. Taking the body off was literally 6 screws and took minutes. There are some tight working spaces but this is an easy task. Just make sure to wear gloves. I have some cut and bruised fingers, but then again I just tore into it. Will finish the install today and update.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-09-2020, 10:38 AM | #2 |
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: G22 fsip 221-48vspeedey install
Old motor. Does look a little burned up.
|
04-09-2020, 10:55 AM | #3 |
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: G22 fsip 221-48vspeedey install
I do not have the speed sensor yet but can I run the cart without one for a couple of days?
|
04-09-2020, 12:12 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G22 fsip 221-48vspeedey install
Just steal the plug off the sensor on your old motor. Red to red, black to black, green to blue.
|
04-09-2020, 01:10 PM | #5 |
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: G22 fsip 221-48vspeedey install
Yeah I was gonna do that. That is easy. Unfortunately the motor did not come with the sensor. FSIP is overnighting me one. Excellent customer service by the way. So I was just going to run it without one for a day or two. Is that ok?
|
04-09-2020, 01:56 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G22 fsip 221-48vspeedey install
You will have to disable rpm limit in alltrax, or you will get crap speed.
|
04-09-2020, 01:56 PM | #7 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: G22 fsip 221-48vspeedey install
Nice install, let us know what speeds you get
|
04-09-2020, 02:44 PM | #8 |
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: G22 fsip 221-48vspeedey install
CGtech, can you tell me exactly which setting to change just for the day?
Jake, thanks for the compliment. You like my cables? I made all 2 gauge welding cables (I have a hydraulic cable crimper) |
04-09-2020, 02:52 PM | #9 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: G22 fsip 221-48vspeedey install
Cables look great, gotta love the hydraulic crimpers.
|
04-09-2020, 06:24 PM | #10 |
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: G22 fsip 221-48vspeedey install
32 on 18" tires. A little too fast but I can fix that. Very nice motor and controller.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Field Maps for FSIP 48VSPEEDEY Motor | Electric EZGO | |||
FSIP Speed Motor Install | Electric Club Car | |||
FSIP controller install | Electric EZGO | |||
500 FSIP Controller install Series 03 | Electric Club Car | |||
FSIP Install question | Electric Club Car |