Value of a 2018 RXV

[kernal]

Originally Posted by SBIRD!

That looks like a gen 3 DPI charger, same as I bought new in 2017. At the time I thought it was the best you could get. I know there's better now but mines been trouble free.
OP follow the brake install procedure when installing it and if it runs you got a great deal.

Agree. Gen IV versions of that don't have float mode. I might be tempted to keep that charger. (assuming you intend to flip that cart.)

[bbbdale]

Originally Posted by kernal

Agree. Gen IV versions of that don't have float mode. I might be tempted to keep that charger. (assuming you intend to flip that cart.)

When I plugged the cart in and watched the needle it was kind of erratic. Started around 5v, jumped up and down from 7-10 volts and after 5 minutes it shut off and said “Charged”. On all my other chargers the needle was constant. Is this just a different type of charger?

Any thought on why 3 batteries read 12.7 and the 4th 14.4v?


Sent from my iPhone using Tapatalk

[usgicollector]

Originally Posted by bbbdale

When I plugged the cart in and watched the needle it was kind of erratic. Started around 5v, jumped up and down from 7-10 volts and after 5 minutes it shut off and said “Charged”. On all my other chargers the needle was constant. Is this just a different type of charger? Last year I had that exact charger doing the same thing. On mine the board was bad. The boards on the DPI chargers run Around $160.00 or so.

Any thought on why 3 batteries read 12.7 and the 4th 14.4v? 12.7 is a fully charged battery. Check that battery again today and see if you get the same reading. Could be someone just charged that single battery by itself right before you got the cart.


Sent from my iPhone using Tapatalk