|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-22-2010, 12:28 PM | #1 |
Not Yet Wild
Join Date: Mar 2010
Location: East Texas
Posts: 42
|
G1 4" vs 6" lift
Just recieved my 4" Allsports lift from Everything Carts. BUT- now I am having 2nd thoughts and considering ordering a 6" lift. The price is not that different. Does anyone have any advice? Is there a noticable difference in handling? I have a set of Polaris wheels/tires that I think I could use with the 6" lift but I also dont want to put such a big tire to cut down on the power. Mostly used driving around the farm, county roads, etc. Thanks in advance for any advice.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-22-2010, 03:37 PM | #2 |
Gone Wild
Join Date: Mar 2010
Location: Eminence, IN
Posts: 534
|
Re: G1 4" vs 6" lift
i have about 6" of lift on my g1 and 22x11x10 tires and wheels so with the tires and the lift its about 8" of lift. my dad (who is 55yrs old) thinks its a little bit tall but i dont mind it. i use my every single day and i do have to say that when i blew out my knee it was a little bit to tall feeling hoping down from the seat to the ground. but now that my knee is back up to speed its ok again
|
07-22-2010, 03:49 PM | #3 |
Not Yet Wild
Join Date: Mar 2010
Location: East Texas
Posts: 42
|
Re: G1 4" vs 6" lift
Thanks for the reply- does it feel stable at speed?
|
07-22-2010, 03:50 PM | #4 |
Not Yet Wild
Join Date: Mar 2010
Location: East Texas
Posts: 42
|
Re: G1 4" vs 6" lift
and did it cut down on your power?
|
07-22-2010, 09:15 PM | #5 |
Gone Wild
Join Date: Mar 2010
Location: Eminence, IN
Posts: 534
|
Re: G1 4" vs 6" lift
I built my own lift and when i did i made the front end 4" wider and put high offset wheels on it so its REALLY wide right now but is VERY VERY stable and looks good too
|
08-16-2010, 08:10 PM | #6 |
Gone Wild
Join Date: Jun 2009
Location: Ontario Canada
Posts: 180
|
Re: G1 4" vs 6" lift
I'm doing a 5" jakes lift and the primary clutch wont clear the frame with the sheild on it. Do you guys just run it without the sheild or what did you do ?
|
08-16-2010, 09:17 PM | #7 |
Not Yet Wild
Join Date: Mar 2010
Location: East Texas
Posts: 42
|
Re: G1 4" vs 6" lift
I went with the 4" and no issues. I dont think mine has the shield you are talking about.
|
08-17-2010, 05:32 AM | #8 |
Gone Wild
Join Date: Mar 2010
Location: Eminence, IN
Posts: 534
|
Re: G1 4" vs 6" lift
i notched my frame to clear my clutch...its a fairly common thing to have to do
|
|
|
Similar Threads | ||||
Thread | Forum | |||
monster club car 20" lift on 40" boggers | Lifted Golf Carts | |||
Club Car Gas Cart 7.5" A-arm Lift On 28" Mudlites For Sale | Golf Carts and Parts | |||
Will 23" Tires fit a 99' EZGO elec. w/jakes 5" lift | Lifted Golf Carts | |||
89" Marathon with 4" lift....can I fit 23" tires??? | Electric EZGO | |||
I want to raise my Jakes 6" lift another inch for a total of 7". | Lifted Golf Carts |