|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-12-2012, 12:44 PM | #1 |
Not Yet Wild
Join Date: Jun 2012
Posts: 5
|
2005 G22 lug and hub nut sizes
I know this sounds like a silly question but my cart is 300 miles away and i want to make sure I have all the right tools for a lift kit and torque spring upgrade this weekend.
I have a standard and metric 3/8 drive socket set, shallow and deep well, along with most popular size wrenches. I want to make sure I have the right size for the lug nuts, and more importantly the hub nut.... can someone tell me what size these are? Also, I have a torque wrench I can take if there are any specific torque requirements for any of the bolts/nuts I'll be touching during a lift kit and torque spring installation? Thanks for helping out new guy! ANY words of wisdom on these installs is greatly appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-14-2012, 01:52 AM | #2 |
Not Yet Wild
Join Date: Jun 2012
Location: Snohomish, WA
Posts: 45
|
Re: 2005 G22 lug and hub nut sizes
lug nut and hub nut are both 3/4" or 19MM
|
06-14-2012, 06:51 AM | #3 |
Not Yet Wild
Join Date: Jun 2012
Posts: 5
|
Re: 2005 G22 lug and hub nut sizes
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
tire sizes | Gas Club Car | |||
Tire sizes? | Electric EZGO | |||
Tire Sizes | Lifted Golf Carts | |||
Wheel lug nut sizes | Design Center | |||
Tire Sizes | Electric Club Car |