g1 rear end noises

CART-ZILLA · 07-13-2012, 01:58 PM

i have a 84 g1 and when i first start it up and go the rearend roars and kinda vibrates i drilled out the linkage hole that attaches to the governer in the rearend ....Do i need to dissasemble the rear and take all that crap out of it? when it's warm and i get to about 19-21 mph it makes a sound like (don't laugh) wah wah wah and the "wahs" get faster does that mean the governer is still tring to engage?? All opinions are welcomed ...lol thanks Nate

1moretoy · 07-13-2012, 02:11 PM

I'd like to know too. I posted in the Club Car section and didn't get any responses. My Yammy has a CC rear with a similar problem. If I can't find a breakdown of the internal workings so I can figure out what it does, I am probably gonna take mine apart and remove it too.

CART-ZILLA · 07-13-2012, 02:23 PM

Just wondering why did you put a club car Rear end in a yamaha...Is there any benefits to this?

1moretoy · 07-13-2012, 03:11 PM

Quote:

Originally Posted by CART-ZILLA

Just wondering why did you put a club car Rear end in a yamaha...Is there any benefits to this?

it was in it when I bought it. Originally it was an electric cart and the previous owner installed a clone engine but it didn't have a reverse so he had a gas rear end installed and a CC was all the golf cart repair shop had laying around.

yamarancher · 07-13-2012, 06:53 PM

why did you drill out the govenor shaft hole?

smallblock450sl · 07-13-2012, 06:56 PM

Would be nice to know if the noise was the secondary sliding sheave bushing or the input shaft damaged makeing the noise first. If you've done that, most likely internal gears or bearings.

CART-ZILLA · 07-13-2012, 07:17 PM

i didn't drill out the shaft hole just the linkage that fits on the shaft.... it sounds internal like the rear gov is still tring to engage... i think i am gonna disect it ...lol

CART-ZILLA · 07-14-2012, 10:37 AM

i dont wanna tear it down unless i have too still open for opinions....lol

CART-ZILLA · 07-14-2012, 10:40 AM

i just rode it after it warms up it does not vibrate anymore but it still makes that wah wah noise and only getting about 22-23 mph...help!!!!

07-13-2012, 01:58 PM	#1
CART-ZILLA Gone Wild Join Date: May 2011 Location: Pickens/Dacusville s.c. Posts: 1,386	g1 rear end noises i have a 84 g1 and when i first start it up and go the rearend roars and kinda vibrates i drilled out the linkage hole that attaches to the governer in the rearend ....Do i need to dissasemble the rear and take all that crap out of it? when it's warm and i get to about 19-21 mph it makes a sound like (don't laugh) wah wah wah and the "wahs" get faster does that mean the governer is still tring to engage?? All opinions are welcomed ...lol thanks Nate

07-13-2012, 02:11 PM	#2
1moretoy Never really finished Join Date: Jun 2010 Location: Georgia Posts: 1,102	Re: g1 rear end noises I'd like to know too. I posted in the Club Car section and didn't get any responses. My Yammy has a CC rear with a similar problem. If I can't find a breakdown of the internal workings so I can figure out what it does, I am probably gonna take mine apart and remove it too.

07-13-2012, 02:23 PM	#3
CART-ZILLA Gone Wild Join Date: May 2011 Location: Pickens/Dacusville s.c. Posts: 1,386	Re: g1 rear end noises Just wondering why did you put a club car Rear end in a yamaha...Is there any benefits to this?

07-13-2012, 06:53 PM	#5
yamarancher Gone Wild Join Date: Nov 2011 Posts: 232	Re: g1 rear end noises why did you drill out the govenor shaft hole?
yamarancher Gone Wild Join Date: Nov 2011 Posts: 232

07-13-2012, 06:56 PM	#6
smallblock450sl Sometime's............ Join Date: Oct 2007 Location: Tacoma Washington Posts: 11,875	Re: g1 rear end noises Would be nice to know if the noise was the secondary sliding sheave bushing or the input shaft damaged makeing the noise first. If you've done that, most likely internal gears or bearings.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-13-2012, 07:17 PM	#7
CART-ZILLA Gone Wild Join Date: May 2011 Location: Pickens/Dacusville s.c. Posts: 1,386	Re: g1 rear end noises i didn't drill out the shaft hole just the linkage that fits on the shaft.... it sounds internal like the rear gov is still tring to engage... i think i am gonna disect it ...lol

07-14-2012, 10:37 AM	#8
CART-ZILLA Gone Wild Join Date: May 2011 Location: Pickens/Dacusville s.c. Posts: 1,386	Re: g1 rear end noises i dont wanna tear it down unless i have too still open for opinions....lol

07-14-2012, 10:40 AM	#9
CART-ZILLA Gone Wild Join Date: May 2011 Location: Pickens/Dacusville s.c. Posts: 1,386	Re: g1 rear end noises i just rode it after it warms up it does not vibrate anymore but it still makes that wah wah noise and only getting about 22-23 mph...help!!!!

Similar Threads
Thread	Forum
Golfcart making noises	Gas Yamaha
94 TXT clutch noises	Gas golf carts
Strage noises from a G16	Gas Yamaha
G16 noises	Gas Yamaha
Rear end noises-primarily on left side	Gas EZGO