05-12-2013, 08:28 PM | #1 |
Not Yet Wild
Join Date: Jan 2013
Posts: 43
|
clutch Q
I have a clone engine with a club cart clutch. I drilled the shaft and had issues with offcentering.. I was using allthread and was able to drive it around a few days before the allthread broke. I re drilled the shaft and it is Waaay better. However the center if the club cart clutch pulled out and dropped the weights and outershell. My guess is I torqued the insert on he outer part of the clutch before and now that it is centered it pulled out.
Any help is appreciated and thank you in advance. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-15-2013, 11:41 AM | #2 |
Not Yet Wild
Join Date: Jan 2013
Posts: 43
|
Re: clutch Q
I just figured it out. I replaced the washer on the outside with a lock washer that was to small. Fixed with a larger washer.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Replace Drive Clutch Spring Without Removing Clutch? | Gas EZGO | |||
Clutch Help - G1 Drive Clutch Spring | Gas Yamaha | |||
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
stock ezgo clutch and yamaha clutch | Big Block Talk! |