|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-06-2013, 11:22 PM | #1 |
Not Yet Wild
Join Date: Apr 2013
Location: Lebanon Jct, KY
Posts: 17
|
Diameter of PTO shaft on KF-82
I've looked around here and searched the web, but it seems that the answer is never there, but can anyone tell me the diameter of the PTO on the KF82?
I know some of you have to know this and would greatly appreciate this information as I am looking into repacing mine with a Predator 420cc that has a 1" shaft. It is becoming increasingly harder to find parts for the KF82 and I find them, they are expensive! I've got to get my buggy back to running and can't find a coil exciter and it seems that replacing the motor would be the more economical alternative. Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-08-2013, 07:21 PM | #2 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,846
|
Re: Diameter of PTO shaft on KF-82
Do you mean the end of the crankshaft where the clutch mounts? I have two KF82 cranks in my basement and can measure one if that's what you need.
|
06-11-2013, 08:32 PM | #3 |
Not Yet Wild
Join Date: Apr 2013
Location: Lebanon Jct, KY
Posts: 17
|
Re: Diameter of PTO shaft on KF-82
Thanks, Springbok, but when I pulled the engine, I was able to get my caliper in there. It looks to be 1 inch in diameter. Still thinking about that Harbor Freight motor...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Axle tube diameter??? | Electric EZGO | |||
key switch diameter | Electric Club Car | |||
Engine shaft diameter | Gas Columbia ParCar | |||
Axle Housing Diameter | Electric EZGO |