|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-17-2013, 12:23 AM | #21 |
Gone Wild
Join Date: Aug 2013
Posts: 613
|
Honestly, I'm not sure. I haven't changed them out, so whatever is in there from the factory. I'll pull them tomorrow and check.
Sent from my DROID RAZR using Tapatalk 2 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-17-2013, 12:45 AM | #22 |
Guest
Posts: n/a
|
Re: Factory LED Replacement Bulbs
i use the T10 LED blubs
The T10 5 SMD 5050 LED light bulbs will replace 2821, 2825, 168, 194, W5W, 158, 147, 152, 159, 161, 184, 192, 193, 901, 904, 916, 917, 918, 920, 921, 922, 923, 926, 927. |
12-17-2013, 06:56 AM | #23 |
Not Yet Wild
Join Date: Oct 2013
Location: League City, TX
Posts: 60
|
Re: Factory LED Replacement Bulbs
AWESOME INFO!! My wallet just got lighter! Thanks for the headsup!
|
12-17-2013, 09:28 AM | #24 |
Gone Wild
Join Date: Oct 2010
Location: Lancaster SC
Posts: 827
|
Re: Factory LED Replacement Bulbs
Those are great looking and an easier upgrade option compared to an hid kit. The less draw of the headlights are what I especially like
|
12-17-2013, 02:09 PM | #25 |
Gone Wild
Join Date: Aug 2013
Posts: 613
|
Re: Factory LED Replacement Bulbs
Go got it... They are cheap enough to try, and only took 5 minutes to install. It was harder getting the old bulbs out than the new ones in...
|
12-17-2013, 02:37 PM | #26 | |
Not Yet Wild
Join Date: Oct 2013
Location: League City, TX
Posts: 60
|
Re: Factory LED Replacement Bulbs
Quote:
Which ones are they? They look like the same wattage (15) except the plug is 90* instead of straight out the back. |
|
12-17-2013, 04:03 PM | #27 |
Gone Wild
Join Date: Aug 2013
Posts: 613
|
Re: Factory LED Replacement Bulbs
If I remember correctly, the ebay listing had about 5 88* model numbers listed. The ones I ordered had a picture of the straight connection. The ones I received had the 90* connection...
I was concerned about this as well until I actually had the item in hand. For the front bulbs, either would work. I'm not sure of the rear. Hope this helps... |
12-17-2013, 04:21 PM | #28 |
Gone Wild
Join Date: Oct 2010
Location: Lancaster SC
Posts: 827
|
Re: Factory LED Replacement Bulbs
I'm running 880 silverstars in mine right now so either would fit. As far as the rears, mine are full leds. They make regular rear lights?
|
12-17-2013, 04:28 PM | #29 |
Gone Wild
Join Date: Aug 2013
Posts: 613
|
Re: Factory LED Replacement Bulbs
Dunno... I'm running a liteseasy led bar for my rear lights...
|
12-18-2013, 07:15 AM | #30 |
Not Yet Wild
Join Date: Oct 2013
Location: League City, TX
Posts: 60
|
Re: Factory LED Replacement Bulbs
Off of the EZgo website it shows a pic of the factory taillight bulb below.
It looks like a standard 1157 dual element bulb. If that's the case it's an easy swap. I was just worried about the 90* plug or straight on the headlights. I was going to take mine apart last night and didn't have the time. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Replacing bulbs in factory light bar? | Electric EZGO | |||
Ezgo replacement lights/bulbs? | Electric EZGO | |||
Light bulbs | Electric EZGO | |||
Light bulbs | Electric EZGO | |||
Led bulbs | Electric EZGO |