What bent

[aviator160]

Our 06 Precedent with a Ronx 6" A frame lift was impacted by a two foot tall post that jumped out in front of us and stopped our passenger side front wheel dead in its tracks. I did have enough tools to adjust the passenger side front wheel roughly back into line to complete the drive.
I left the cart at camp and will be returning to look at it in a more sober light however I could not see anywhere it was bent.
The passenger side wheel appears to be pushed back maybe and inch or more.
What is the area it might have bent and what do I need to check for?
I appreciate you help

[NoleFan4Ever]

That is really hard to say.... With a RHOX you have a tubular piece beneath the spring and it can (has) been bent before when a cart I had went over the levy. I have also bent the lower control arm before and ruined it. Your best hope will be the impacted shifted the bolts and you can realign, but more than likely you will find it around the areas described above.

[aviator160]

I just know it had to give somewhere and will note what I find and report back
The large bottom tube did not appear to bent so maybe I will be lucky.
Thank You for for the info

[aviator160]

Found U shaped bracket at the top to the spindle post that attaches to the Upper A frame bent as well as bolt shift. Was able to to remove and with some hammer and vise work true it back up to get by for now. Was glad that I could improve it for the holiday weekend. Thanks for your help.

[NoleFan4Ever]

Glad it worked out... Happy carting!