|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-17-2019, 10:18 AM | #1 |
Not Yet Wild
Join Date: Oct 2019
Location: Georgia
Posts: 3
|
350 crank vs 295 crank
Is it possible to destroke a 350 with a 295 crank?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-17-2019, 10:55 AM | #2 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: 350 crank vs 295 crank
I assume your 350 needs a crankshaft and you want to install a 295 because of the cost of the 350 ?
|
10-17-2019, 01:11 PM | #3 |
Not Yet Wild
Join Date: Oct 2019
Location: Georgia
Posts: 3
|
Re: 350 crank vs 295 crank
Partly, availability is another plus it should rev better.
|
10-17-2019, 05:15 PM | #4 |
Not Yet Wild
Join Date: Aug 2019
Posts: 37
|
Re: 350 crank vs 295 crank
I have done a 295 block and head, and bored it out to a 350 std. it’s a stout little motor
Sent from my iPhone using Tapatalk |
10-17-2019, 10:04 PM | #5 |
Gone Wild
Join Date: Sep 2017
Location: South Texas
Posts: 449
|
Re: 350 crank vs 295 crank
If the crank ain’t broke.... take it, and the new rods to a machine shop... let em mate em up... if the journals are worn, they can build em up and turn em... might cost a couple bucks but way cheaper than buying a new crank
|
10-17-2019, 10:51 PM | #6 |
Not Yet Wild
Join Date: Oct 2019
Location: The Netherlands
Posts: 41
|
Re: 350 crank vs 295 crank
|
10-17-2019, 10:57 PM | #7 |
Gone Wild
Join Date: Sep 2017
Location: South Texas
Posts: 449
|
Re: 350 crank vs 295 crank
I believe the rods are the same... the stroke is a bit different
|
10-18-2019, 01:05 AM | #8 |
Not Yet Wild
Join Date: Oct 2019
Location: The Netherlands
Posts: 41
|
Re: 350 crank vs 295 crank
|
10-18-2019, 10:47 PM | #9 |
Not Yet Wild
Join Date: Oct 2019
Location: Georgia
Posts: 3
|
Re: 350 crank vs 295 crank
So has anyone actually built a 350 with a 295 crank?
|
02-22-2021, 03:34 PM | #10 |
Not Yet Wild
Join Date: Aug 2019
Posts: 37
|
Re: 350 crank vs 295 crank
It’s not possible to build a 350 block with a 295 crank. The stroke is about 1mm shorter than the 350 crank. I used to build these engines all the time for businesses. Lol learned the hard way that they for sure are different.
Sent from my iPhone using Tapatalk |
Tags |
the same except stroke? |
|
|
Similar Threads | ||||
Thread | Forum | |||
GX 670 can't crank | Big Block Talk! | |||
New crank or not | Gas Harley Davidson | |||
Does a 2pg have a crank case pressure pickup tube inside the crank case? (pic) | Gas EZGO | |||
98 txt gas will not crank | Gas EZGO | |||
aligment of cam shaft, crank, and crank balance on g14 | Gas Yamaha |