lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car
Gas Club Car Gas DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-03-2011, 08:17 PM   #1
on_the_fly
Gone Wild
 
on_the_fly's Avatar
Club Car
 
Join Date: Dec 2010
Location: centural kentucky
Posts: 241
Default breather question on my cc

i added a lift today to my cart. i made the lift myself and i droped the front of the motor to help keep it at the factory angle for oil flow but noticed now my air intake tube is about half flat against the black box beside the air box. has anyone else had to deal with this, do i need to relocate that box, or is there a hose made to adapt around this issue, i havent had that box apart to look and see if i could notch it out some way. just looking for some thoughts. o and the lift is 7 and a half inches and i dropped the front of the motor 3. this with fatcory tires put my floor board at 19 inches off the ground. and im looking to run 23x11x10's just havent bought them yet.
on_the_fly is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-04-2011, 07:57 AM   #2
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 13,830
Default Re: breather question on my cc

Yep!
That happens when you lower the front of the engine cradle!

Here's a link for an intake tube that'll resolve that issue:
http://www.buggiesgonewild.com/gas-c...ubcar-gas.html

and some before and after pics of mine!

Attached Images
File Type: jpg Snubber 4.jpg (184.6 KB, 63 views)
File Type: jpg Intake hose.jpg (53.0 KB, 61 views)
File Type: jpg 034.JPG (78.5 KB, 74 views)
File Type: jpg 033.JPG (73.8 KB, 67 views)
lockman1 is offline   Reply With Quote
Old 02-04-2011, 10:28 AM   #3
on_the_fly
Gone Wild
 
on_the_fly's Avatar
Club Car
 
Join Date: Dec 2010
Location: centural kentucky
Posts: 241
Default Re: breather question on my cc

thanks lockman. n yep my intake tube looks just like the pick.

on mine i remade the whole pice out of the rubber instead of adding a pice of plate looks factory and just reused the two bolts that were there. new pice is out of 1/4" (worked great)
on_the_fly is offline   Reply With Quote
Old 02-04-2011, 11:41 AM   #4
imjman57
Getting Wild
 
imjman57's Avatar
Club Car
 
Join Date: Oct 2010
Location: indy
Posts: 101
Default Re: breather question on my cc

THANK YOU LOCKMAN1 AND BIONIC CARTS AND CUSTOMS !!!!!! lowered my craddle last week. hope I can find the part
imjman57 is offline   Reply With Quote
Old 02-04-2011, 05:16 PM   #5
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 13,830
Default Re: breather question on my cc

On~
post a pic of yours... I found that if ALL of the bends are rubber,
at fast accelleration, the bends will collapse, causing the engine to choke.
Been there... Done that... see my "jury rig" pic below.

im~

Any Briggs and Stratton small engine repair shop can order them for you!
(I had to order mine!)

Attached Images
File Type: jpg 001 - Copy (3).jpg (50.6 KB, 41 views)
lockman1 is offline   Reply With Quote
Old 02-04-2011, 05:37 PM   #6
on_the_fly
Gone Wild
 
on_the_fly's Avatar
Club Car
 
Join Date: Dec 2010
Location: centural kentucky
Posts: 241
Default Re: breather question on my cc

well here it is. home made 7 inch lift. as of now i got $30.oo bucks into it. all thats left is fix this intake issue (although i drove the cart today and it seem to do fine but it has to only be getting half air so im fixing). need to ajust the brakes and need tires n wheels now.
Attached Images
File Type: jpg lift1.jpg (123.9 KB, 35 views)
File Type: jpg lift2.jpg (91.3 KB, 34 views)
File Type: jpg lift3.jpg (62.2 KB, 34 views)
File Type: jpg lift4.jpg (86.3 KB, 34 views)
on_the_fly is offline   Reply With Quote
Old 02-04-2011, 05:44 PM   #7
crash12888
Gone Crazy
 
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 5,870
Default Re: breather question on my cc

Typed in "Briggs Elbow" on Ebay and got alot of options. Just a thought.......

Here's just one.
http://cgi.ebay.com/NEW-OEM-BRIGGS-S...item483c9d9caa
crash12888 is offline   Reply With Quote
Old 02-06-2011, 07:28 PM   #8
on_the_fly
Gone Wild
 
on_the_fly's Avatar
Club Car
 
Join Date: Dec 2010
Location: centural kentucky
Posts: 241
Default Re: breather question on my cc

Well I ordered that Briggs manifold. I spent a day or so trying to find one that the shipping wasnt gonna kill me. Dang it's a 12 dollar part and with shipping it was from 19.98 ( which is what I got) all the way up to 26.99. All were shipping ups for this little part, why can't they stick it in the USPS mail box n ship it out for 2 bucks. Sheesh. Anyways it's on the way !!!
on_the_fly is offline   Reply With Quote
Old 02-06-2011, 10:40 PM   #9
on_the_fly
Gone Wild
 
on_the_fly's Avatar
Club Car
 
Join Date: Dec 2010
Location: centural kentucky
Posts: 241
Default Re: breather question on my cc

by the way i ordered mine from here, if any of you were looking for the same part. $11.99 + shipping (to my zip) for a total of $19.98
if you just click the highlighted link its the parts surch but if you copy n paste the whole link it will take you straight to the part.

http://www.mowtownusa.com/42.html?m5:search[keyword]=691368;search[keywordSearchType]=phrase;search[matchWholeWords]=1;search[keywordFields]=string0:text0:code:text2;search[fuzzy_sku]=1
on_the_fly is offline   Reply With Quote
Old 02-21-2011, 08:45 PM   #10
imjman57
Getting Wild
 
imjman57's Avatar
Club Car
 
Join Date: Oct 2010
Location: indy
Posts: 101
Default Re: breather question on my cc

installed the new intake manifoild today, used 6mm all thread insted of grind or shave on the intake elbow. had to install the brass fitting. easy to install looks great no more crushed hose
Attached Images
File Type: jpg 100_1030.jpg (34.9 KB, 25 views)
File Type: jpg 100_1073.jpg (114.2 KB, 31 views)
File Type: jpg 100_1067.jpg (72.8 KB, 30 views)
imjman57 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
1990 Club car With flat head Rev limiter question and govenor question Gas Club Car
G2 Leaking Gear Oil Out Breather Gas Yamaha
EZ GO Breather Box Golf Carts and Parts
Breather EZ-GO/Jacobson Golf Carts and Parts
Air Breather On 1997G16A YAMAHA Gas Yamaha


All times are GMT -5. The time now is 06:09 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.