G16 Problem

Jbrezzy · 07-28-2011, 04:00 PM

Hello all, new guy here with a issue on a g16a. When I mash the gas pedal it takes a few seconds for it to take off. This is happening only when it comes to a complete stop. It's like the fuel pump is having to prime the carb when it stops. I just cleanded the carb now this. Help thanks.

Mike Mac · 07-29-2011, 12:27 AM

Mine does the same. Maybe not a few seconds, but probably almost a full second, before the motor gets up and the clutch starts to close. I call that normal!

Jbrezzy · 07-29-2011, 06:52 AM

Thanks Mike, I think I fixed it. My air box was pinching the hose that runs from the fuel filter to the top of the motor. Once I kinda moved the hose back off the box now its like yours goes in a second. Now if only I could get it to run little better at slow speed.

Mike Mac · 07-29-2011, 08:35 AM

Low speed might be throttle linkage adjustment, or one or both clutches not sliding smoothly on their shafts. Try giving both a pump of grease from a grease gun. Each one has a zirk fitting on it.

If you just got it, read this site, you will learn tons (all old posts). Do the maintenance and you'll have a very good running car. Works every time!

There is a sticky above, that you can down load the "owners manual". There is quite abit of maint. info. in there.

Good luck, Mike

Mike Mac · 07-29-2011, 08:37 AM

double post.

07-28-2011, 04:00 PM	#1
Jbrezzy Not Yet Wild Join Date: Jul 2011 Posts: 2	G16 Problem Hello all, new guy here with a issue on a g16a. When I mash the gas pedal it takes a few seconds for it to take off. This is happening only when it comes to a complete stop. It's like the fuel pump is having to prime the carb when it stops. I just cleanded the carb now this. Help thanks.
Jbrezzy Not Yet Wild Join Date: Jul 2011 Posts: 2

07-29-2011, 12:27 AM	#2
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: G16 Problem Mine does the same. Maybe not a few seconds, but probably almost a full second, before the motor gets up and the clutch starts to close. I call that normal!

07-29-2011, 06:52 AM	#3
Jbrezzy Not Yet Wild Join Date: Jul 2011 Posts: 2	Re: G16 Problem Thanks Mike, I think I fixed it. My air box was pinching the hose that runs from the fuel filter to the top of the motor. Once I kinda moved the hose back off the box now its like yours goes in a second. Now if only I could get it to run little better at slow speed.
Jbrezzy Not Yet Wild Join Date: Jul 2011 Posts: 2

07-29-2011, 08:35 AM	#4
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: G16 Problem Low speed might be throttle linkage adjustment, or one or both clutches not sliding smoothly on their shafts. Try giving both a pump of grease from a grease gun. Each one has a zirk fitting on it. If you just got it, read this site, you will learn tons (all old posts). Do the maintenance and you'll have a very good running car. Works every time! There is a sticky above, that you can down load the "owners manual". There is quite abit of maint. info. in there. Good luck, Mike

07-29-2011, 08:37 AM	#5
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: G16 Problem double post.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Good problem bad problem	Big Block Talk!