|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-27-2012, 11:07 PM | #1 |
Not Yet Wild
Join Date: Dec 2012
Posts: 5
|
2008 EZGO RXV Jakes 6" Spindle lift installation Photos
Does anyone happen to have any better photos of the rear block lift on the leaf spring for a 2008 and above Electric EZGO RXV 6" Jake's Spindle lift? The directions and accompanying photo and very poorly written for someone whos never done one. Ive got the front done and it was relatively easy. Im sure I could spend a few hours via trial and error to figure it out, but a photo would sure help! Thank you all for any info you may provide.
(link to the lift kit i have) http://www.jakesliftkits.com/images/...s/P0010320.jpg |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-28-2012, 04:41 PM | #2 |
Gone Wild
Join Date: Apr 2012
Location: Georgia
Posts: 378
|
Re: 2008 EZGO RXV Jakes 6" Spindle lift installation Photos
2012-12-28_16-30-55_794.jpg this is what the rear of my RXV looks like with the 6" Jakes lift.
|
12-28-2012, 07:22 PM | #3 | |
Not Yet Wild
Join Date: Dec 2012
Posts: 5
|
Re: 2008 EZGO RXV Jakes 6" Spindle lift installation Photos
Quote:
|
|
12-28-2012, 07:45 PM | #4 |
Gone Wild
Join Date: Apr 2012
Location: Georgia
Posts: 378
|
Re: 2008 EZGO RXV Jakes 6" Spindle lift installation Photos
Shocks are mounted behind the supplied bracket. Sorry cart was dirty and I just snapped a picture for you in the garage. If you need anything feel free to ask. I could pull it out tomorrow and lift it up if it helps. Just an FYI I have spacers on the rear axle to even out the tires offset to match the front.
|
12-28-2012, 08:08 PM | #5 | |
Not Yet Wild
Join Date: Dec 2012
Posts: 5
|
Re: 2008 EZGO RXV Jakes 6" Spindle lift installation Photos
Quote:
|
|
12-28-2012, 09:12 PM | #6 |
Not Yet Wild
Join Date: Dec 2010
Location: South Mississippi
Posts: 66
|
Re: 2008 EZGO RXV Jakes 6" Spindle lift installation Photos
Jerj, what size spacers do you have?
|
12-28-2012, 10:49 PM | #7 |
Gone Wild
Join Date: Apr 2012
Location: Georgia
Posts: 378
|
Re: 2008 EZGO RXV Jakes 6" Spindle lift installation Photos
I got little over 1". Mount your tires and see how they look. You can always figure out spacing later. I actually used the original lug nuts behind the wheels to space mine out.
|
12-29-2012, 09:00 PM | #8 |
Not Yet Wild
Join Date: Dec 2010
Location: South Mississippi
Posts: 66
|
Re: 2008 EZGO RXV Jakes 6" Spindle lift installation Photos
Keith, what kind and size of wheels and tires did you upgrade with? Also, what offset? Thanks
|
Tags |
jakes 6" spindle lift |
|
|
Similar Threads | ||||
Thread | Forum | |||
What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1" back | Lifted Golf Carts | |||
Jakes 6" Spindle Lift Question | Lifted Golf Carts | |||
Jakes 6" Spindle Lift Kit Question | Lifted Golf Carts | |||
Jakes Spindle lift 3" vs. 6" | Lifted Golf Carts | |||
6" Jakes spindle lift for 84-96 Club Car | Golf Carts and Parts |