|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-07-2020, 02:06 PM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2008
Posts: 4
|
E-Z-Go TXT48 Controller Programming
Is there a way to unlock "freedom" mode without using the ezgo passkey? I have a 1313-4 Curtis controller.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-07-2020, 02:56 PM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,147
|
Re: E-Z-Go TXT48 Controller Programming
If you have the pc software and developer cable yes.. otherwise no.
|
|
|
|
|
04-07-2020, 03:09 PM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2008
Posts: 4
|
Re: E-Z-Go TXT48 Controller Programming
where can i get those?
|
|
|
|
|
04-07-2020, 07:33 PM
|
#4 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,147
|
Re: E-Z-Go TXT48 Controller Programming
If you have some computer skills and a soldering iron you can make your own. http://www.buggiesgonewild.com/showt...ht=Programming
|
|
|
|
|
04-07-2020, 07:42 PM
|
#5 | |
|
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,049
|
Re: E-Z-Go TXT48 Controller Programming
Quote:
|
|
|
|
|
|
04-07-2020, 11:33 PM
|
#6 |
|
Resident Curmudgeon
Join Date: Oct 2011
Posts: 1,279
|
Re: E-Z-Go TXT48 Controller Programming
I managed to 'trick' a non-freedom unlocked controller with saved firmware frome one that was which was the same model, but I could only do that trick once. Every subsequent attempt results in an error. It worked once. Not sure how or why.
On Club Car IQ, assuming it's the same model and firmware you can save a speed code 4 to a Curtis 1313 w/ OEM level and write to a Speed code 3 and 'upgrade' it that way. Does anyone with soldering skill have a means to figure out what the passkeys actually do to 'save' the 'uses'? we got a lot of ones that have 'expired' after 20 uses but have found no sign of a non-volatile memory or IC of any type when opening one up. I'd love to figure out how to reset one so it will work. They're quite expensive. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Controller Programming | Electric EZGO | |||
| TXT48 2014 Controller/solenoid $150 | Golf Carts and Parts | |||
| TXT48 controller suggestions | Electric EZGO | |||
| OEM EZGO TXT48 Motor & Controller - Free Shipping | Golf Carts and Parts | |||
| Controller Programming? | Electric EZGO | |||
Linear Mode
