Dropping engine cradle mount on lifted G22a - Bracket?

MrGriz · 01-29-2018, 05:36 PM

I wasn't sure if I should put this here or under lifted carts; the coin said try here first.

I just installed a BMF 6" A-arm lift kit on my '05 G22a and not surprisingly, the engine cradle is now sitting on a pretty extreme angle. I see that Vegas Carts has a bracket to lower the cradle mount on a G2/G9, but I can't find anything for the G22. It's looking like I have three options and I'm looking for opinions and advice.

1. Does someone make a bracket to lower the front of the cradle?

2. Should I make something myself to lower the front of the cradle?

3. Should I just crack open a beer and not worry about the angle?

Thanks!

smallblock450sl · 01-29-2018, 08:35 PM

#1- I have never seen one, or anyone that has made one. #2- If you fab, why not? I would build a bracket off the main frame and one off the swing arm to except heim joint's like the Ezgo's. #3-Have a cocktail and relax...I've done many 6" lift's and never had an oiling problem with the Yamaha engine. If you decide on a big block, would be a different story. If you leave it this way, might recommend a JW1 choke cable. They are longer then the Ju0 cables and help the binding problem. #4- Have a beer or coctail

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
2pg Engine Cradle??	Gas EZGO
WTB Solonoid mount bracket and key switch plate for 99 EZGO	Golf Carts and Parts
Controller Mount/Bracket P/N ..	Electric EZGO
snubber mount bracket issue	Gas Club Car
Engine cradle for G-9	Big Block Talk!

01-29-2018, 05:36 PM	#1
MrGriz Not Yet Wild Join Date: Oct 2017 Location: Waterford, WI Posts: 31	Dropping engine cradle mount on lifted G22a - Bracket? I wasn't sure if I should put this here or under lifted carts; the coin said try here first. I just installed a BMF 6" A-arm lift kit on my '05 G22a and not surprisingly, the engine cradle is now sitting on a pretty extreme angle. I see that Vegas Carts has a bracket to lower the cradle mount on a G2/G9, but I can't find anything for the G22. It's looking like I have three options and I'm looking for opinions and advice. 1. Does someone make a bracket to lower the front of the cradle? 2. Should I make something myself to lower the front of the cradle? 3. Should I just crack open a beer and not worry about the angle? Thanks!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-29-2018, 08:35 PM	#2
smallblock450sl Sometime's............ Join Date: Oct 2007 Location: Tacoma Washington Posts: 11,874	Re: Dropping engine cradle mount on lifted G22a - Bracket? #1- I have never seen one, or anyone that has made one. #2- If you fab, why not? I would build a bracket off the main frame and one off the swing arm to except heim joint's like the Ezgo's. #3-Have a cocktail and relax...I've done many 6" lift's and never had an oiling problem with the Yamaha engine. If you decide on a big block, would be a different story. If you leave it this way, might recommend a JW1 choke cable. They are longer then the Ju0 cables and help the binding problem. #4- Have a beer or coctail