|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-29-2020, 09:15 PM | #1 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
ISO Drive clutch starter pulley
Does anyone know a part number or where to get starter belt pulley that bolts to the back of the drive clutch? Mine was removed at some point and I cannot find it in my garage. Anyone have a bad clutch they could remove it from? Clutch is off a 97 ds
Update: got part number from David Hicks / revolution carts. 1012824. He can order but lookin for some used / cheaper as I just want it to start my old kf82 motor to make sure still runs before I try to part with it- it’s been sitting for 8 years... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-29-2020, 09:57 PM | #2 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,669
|
Re: ISO Drive clutch starter pulley
I'll check tomorrow but I think I have a couple of them in one of my bins. I've seen smaller ones and bigger ones. Is there a specific one you need? I'm pretty positive I have a smaller one I took off a new clutch and replaced it with my old one because it was a larger size, may have a large one too.
|
04-29-2020, 10:15 PM | #3 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: ISO Drive clutch starter pulley
I think it was 6”
|
04-30-2020, 01:26 PM | #4 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: ISO Drive clutch starter pulley
Found a 5-1/2” at local hardware store and popped the holes on Bridgeport to mount to clutch. Should work for what I need just wanting to be able to try to start my kf82 that been sitting... just had to pop the 3 mounting holes it’s 3” bolt circle and bored 2” hole in center to remove the hub that was on it and clear the hub of the clutch.
|
04-30-2020, 07:05 PM | #5 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,669
|
Re: ISO Drive clutch starter pulley
The one I have is the larger 7" from a FE350. They used a slightly larger pulley I believe to help take some of the load off the starter/generator |
04-30-2020, 07:24 PM | #6 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: ISO Drive clutch starter pulley
How much, I’d be interested in the proper one potentially I just wanted to crank this thing over this weekend if I get time also cannot find my adjustment arm/ tensioner.
|
04-30-2020, 07:56 PM | #7 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,669
|
Re: ISO Drive clutch starter pulley
Shoot me a PM :)
Is the adjustment arm the same as a FE290? I may have one of those as well if it's still on the side case cover in my bucket. |
11-14-2022, 08:02 PM | #8 |
Not Yet Wild
Join Date: Jun 2022
Posts: 9
|
Re: ISO Drive clutch starter pulley
Do you happen to have one of these pulley's I could buy off you? 1014289
thanks! |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
95 club car starter pully removal | Gas Club Car | |||
Starter Pully | Clone Engine Swaps | |||
CC Drive Clutch and Starter Gen | Golf Carts and Parts | |||
Diy g1 clutch pully | Gas Yamaha | |||
G9 starter/gen and stock drive clutch | Golf Carts and Parts |