|
04-07-2013, 10:11 PM
|
#41 |
|
Not Yet Wild
Join Date: Mar 2013
Location: Webb City, MO.
Posts: 31
|
Re: Melex 252 resistor speed control electrical problem
Cotton Pickin *@**-/ Thing. Took the body back off the frame and re-coated with primer. Put the body back on the frame and now the motor isn't working. Checked batteries and they are good. Checked the solenoid with the key on and have 38 volts at both sides of the solenoid. Checked the wire from the solenoid to the speed control and have voltage there. What the heck?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-09-2013, 07:04 PM
|
#42 |
|
Gone Wild
Join Date: Apr 2010
Location: Latonia KY
Posts: 604
|
Re: Melex 252 resistor speed control electrical problem
Dumb question, is the pedal rod hooked to the swipe board?
if so, with the pedal pushed down, do you get power thru both sides of the solenoid? How about the FNR? is it in Gear and not in "Neutral"? Check for voltage thru the FNR and at the Motor. Go simple first. Arin |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| melex electrical problem | Melex | |||
| Melex 212 electrical problem | Melex | |||
| Electrical Control Problem | Electric Club Car | |||
| ez go speed control problem | Electric EZGO | |||
| Melex, resistor stlyle, speed selector cables | Melex | |||
Linear Mode
