12-01-2021, 01:18 PM | #1 |
Not Yet Wild
Join Date: Jun 2021
Location: Tampa
Posts: 1
|
Tuning Software Profiles for Icon
Have been screwing around with the settings on my cart (I40FL with 180ah Allied LiPos).
Does anyone have a profile saved somewhere they can share that has aggressive acceleration/max speed because I feel like I'm missing something. I have the acceleration set to .1. I reduced it from 6 to 3, and then 2... moving it anywhere lower than that didn't do anything noticeable. I had it set on .01 and noticed no different. With MAX RPMS for REV and acceleration at 4, it backs up more quickly than it goes forward and has a hell of a lot more torque (it seems). Ive seen carts that have some wicked acceleration off the line and mine definitely does not have that. I mean, it def is faster than my buddies cart by a long shot (same model, lead acid), but its not the 'whiplash' inducing acceleration. Anyone have a profile they care to share or some suggestions on the settings? Acceleration is what I care most about... I use this downtown and that's a lot more important than top end (which is the easiest to set). |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
NEOS/ICON Programming Software Troubleshooting | Icon | |||
ICON Portal Charging algorithm software | Icon | |||
Icon Tuning w/ NEOS Software | Icon | |||
SPM Profiles | Extreme DC! |