|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-15-2018, 07:37 PM | #1 |
Not Yet Wild
Join Date: Apr 2018
Posts: 7
|
Help with Motor
I’m getting ready to pull the motor on my 07 ydre and was wondering if there are any special notes, tricks, or warnings I should know about before I start! I’ll be replacing the brushes.
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-16-2018, 10:21 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Help with Motor
Use a rope, or dog leash as a "choker" around the motor to lower it down. Easier than trying to handle it from underneath.
|
05-16-2018, 11:38 AM | #3 |
Not Yet Wild
Join Date: Apr 2018
Posts: 7
|
Re: Help with Motor
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
36v series motor what is acceptable voltage loss at the motor going up a hill | Electric EZGO | |||
Trade high speed/torque motor pds/dcs for series motor | Golf Carts and Parts | |||
1978 Harley Motor swap to a CRF 450cc motor. pics inside.. gearing help???/ | Gas Harley Davidson | |||
Which gas motor to replace the stock motor in a 1994 Marathon GX444? | Gas EZGO | |||
Yamaha G16 Motor Coupling Squealing, Will my old EZGO motor work? | Electric Yamaha |