|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-24-2012, 12:59 PM | #31 |
Not Yet Wild
Join Date: Feb 2012
Location: Central Missouri
Posts: 74
|
Re: 88 EZGO Marathon Project - Just Got it - Need Advice
Pulling the Drive Clutch - I got lucky and found a bolt that fit, 1/4 inch extension, and an Impact and she popped right off. Now my question is how do I get the bearing out of the race in the Clutch Side Housing. It is in there good and I don't want to crack that case. Also I attached a pic of the plastic mount under the Fuel Pump, where do I find a gasket for this? Thanks, Craig
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2012, 08:10 AM | #32 |
Getting Wild
Join Date: Mar 2012
Location: iowa
Posts: 108
|
Re: 88 EZGO Marathon Project - Just Got it - Need Advice
|
03-25-2012, 08:14 AM | #33 |
Getting Wild
Join Date: Mar 2012
Location: iowa
Posts: 108
|
Re: 88 EZGO Marathon Project - Just Got it - Need Advice
i found out to on builds everything is a few dollars that always help till you get caught, lol.
|
03-25-2012, 08:29 AM | #34 |
Not Yet Wild
Join Date: Mar 2012
Posts: 6
|
Re: 88 EZGO Marathon Project - Just Got it - Need Advice
I have 88 also and my starter/generator is always in starter mode... Do i have a bad switch, or bad generator/starter.... Just did top end rebuild and it starts hard. If i push throttle pedal to floor it still tries to start.... i thought just first inch of pushing pedal down is to start, but mine is tring to start the whole time even when it is running? any ideas???? I am pointing toward either the switch hooked to the gas pedal that makes it start or generator.... I really dont think its generator but, not sure?????
|
03-25-2012, 08:40 AM | #35 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 88 EZGO Marathon Project - Just Got it - Need Advice
Adjust the pedal switch it's not closing or the solenoid is sticking.
|
03-25-2012, 08:52 AM | #36 |
Not Yet Wild
Join Date: Mar 2012
Posts: 6
|
Re: 88 EZGO Marathon Project - Just Got it - Need Advice
Will give that a try...Thanks racin161....csall1 can u put up pics of yer heat shields to the jug... i threw mine away and melted down first piston but the jugs were pretty scared up... so got new jug and all but made my own heat shields... just wanna confirm they are close to what i built
|
03-25-2012, 10:07 AM | #37 |
Gone Wild
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
|
Re: 88 EZGO Marathon Project - Just Got it - Need Advice
Nice Pic's and looks like a great build. I can't wait to see it finished.
|
12-21-2012, 01:32 PM | #38 |
Not Yet Wild
Join Date: Feb 2012
Location: Central Missouri
Posts: 74
|
Re: 88 EZGO Marathon Project - Just Got it - Need Advice
So still moving slowly but making progress. Engine is back together. Bored and installed .50 piston and shaved the head. Just finshed up some of the paint work and put the new wheels and tires on it. I still have some painting to do and a ways to go. Here is an updated picture. Color is Eastwood Moonlight Blue Metallic.
|
12-21-2012, 02:37 PM | #39 |
Monkeylicious
Join Date: Apr 2008
Location: Mississippi
Posts: 952
|
Re: 88 EZGO Marathon Project - Just Got it - Need Advice
Making great progress!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
My '86 EZGO Marathon Project | Electric EZGO | |||
1999 Ezgo electric project. Advice and opinions needed. (with pics) | Electric EZGO | |||
Ezgo Marathon 2PG Gas Project | Gas EZGO | |||
EZGO Project Advice | Electric EZGO | |||
Ezgo Marathon Project??? | Electric EZGO |