|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
|
08-15-2018, 12:36 PM | #1 |
Not Yet Wild
Join Date: Aug 2018
Posts: 9
|
G1 not firing coil source 1 suspected
Hello and thanks for the add. I have an 80's g1 gas cart with no fire...new plug...new plug coil...new cdi...still no fire. So i ran across this forum and tested all the wires as listed in other threads and everything checked out except the brown wire thats supposed to have 350 ohms..it has nothing. I suspect that source coil to be bad i suppose. Now i cant find one or any part that will interchange with it. I also dont know if i tested the ohms correctly with my harbor frieght volt meter. Any help would be greatly apreciated thank you
Last edited by heythere924; 08-15-2018 at 12:38 PM.. Reason: misspelling |
08-15-2018, 02:56 PM | #2 |
Gone Wild
Join Date: Jun 2014
Posts: 330
|
Re: G1 not firing coil source 1 suspected
new plug coil where did you get it [the bit inside the flywheel ?]
new yamaha or china ? my g-1 is throwing extra sparks at random times some predator snowmb bits fit as the bottom end is common I think the sparkie bits are common to both SMB and carts |
08-15-2018, 03:23 PM | #3 |
Not Yet Wild
Join Date: Aug 2018
Posts: 9
|
Re: G1 not firing coil source 1 suspected
I meant new spark plug coil, the coil that connects to the spark plug sorry for the confusion
|
08-15-2018, 04:31 PM | #4 |
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: G1 not firing coil source 1 suspected
the coil behind the fan? I don't think its available anymore
try here http://www.buggiesgonewild.com/gas-y...ulse-coil.html |
08-15-2018, 05:32 PM | #5 |
Not Yet Wild
Join Date: Aug 2018
Posts: 9
|
Re: G1 not firing coil source 1 suspected
yea the coil behind the fan...but its the bigger coil not the little one...i have a picture on my computer but im an idiot and dont know how to attach it it asks me to put in the URL of the image not sure what that means. sorry
|
08-15-2018, 06:15 PM | #6 |
Not Yet Wild
Join Date: Aug 2018
Posts: 9
|
Re: G1 not firing coil source 1 suspected
|
08-15-2018, 02:56 PM | #7 | |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,673
|
Re: G1 not firing coil source 1 suspected
Quote:
Here is problem #1. You'd have better luck with a meter that came out of a box of cheerio's. Harbor freight is great for basic tools... But, a meter is not one of them. Having said that, how are you testing the wire. 350 ohms to what... the other side of the coil? Ground? |
|
08-15-2018, 03:22 PM | #8 |
Not Yet Wild
Join Date: Aug 2018
Posts: 9
|
Re: G1 not firing coil source 1 suspected
Im testing the black wire on the harness that comes out of the crank case and the brown wire out of the crank case for ohms with the meter set on 2000 ohm setting
|
08-17-2018, 05:09 PM | #9 |
Not Yet Wild
Join Date: Aug 2018
Posts: 9
|
Re: G1 not firing coil source 1 suspected
Im not sure where i would find someone to rebuild it. any ideas?
|
08-19-2018, 12:57 AM | #10 |
Not Yet Wild
Join Date: Dec 2017
Posts: 12
|
Re: G1 not firing coil source 1 suspected
Do all the wires have good continuity from the cdi mag to the main plugs as well as to CDI itself and throughout the ignition wiring? Also check the ground .(just things I started off with having the same problem) Curiosity how did the cart run? Would it randomly cut out at times maybe in rough terrain(or just driving in the engine running in general) but run again either right away to a couple seconds?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
99 EZGO not firing. Pulser coil? | Gas EZGO | |||
need g1 source coil | Gas Yamaha | |||
G1 source coil | Gas Yamaha | |||
source coil | Gas EZGO |