|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-20-2021, 06:37 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 15
|
G22 after motor change drives backward
Hi, i've changed the motor in my yamaha g22.
I connected: A1 -> A1 A2 -> A2 F1 -> F1 F2 -> F2 Controller: FSIP Nr. 51-FX302G027 Motor: D&D Motorsystem Nr. 170-505-0001 Now the cart drives backwards in forward position and when i turn the Switch It drives forward in backward position. I've read i can change the cables F1 and F2 to correct this but now my question: Does this changing of F1 and F2 affect the power or speed of the cart or should it be the Same? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-20-2021, 07:05 AM
|
#2 |
|
Gone Wild
Join Date: Jan 2009
Location: Ocala, FL
Posts: 384
|
Re: G22 after motor change drives backward
Does your cart have a reverse buzzer? Does it operate when you are in reverse? If so, then reversing F1 and F2 will not result in reduced speed in forward.
|
|
|
|
|
04-20-2021, 08:19 AM
|
#3 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,192
|
Re: G22 after motor change drives backward
Just reverse F1 and F2 wires.
|
|
|
|
|
| Tags |
| controller, g22, motor |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Motor change | Electric Club Car | |||
| Going backward | Gas EZGO | |||
| going backward | Tomberlin | |||
| First motor change | Big Block Talk! | |||
| Change the motor? | Electric EZGO | |||
Linear Mode
