|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-30-2009, 07:05 PM | #1 |
Not Yet Wild
Join Date: Mar 2009
Posts: 12
|
can the HEI conv be done to a 77
can the HEI be done to a 77 internal starter/ gener... the wiring diagram is for a newer cart but can i still do this? i have no spark on my motor.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-01-2009, 06:17 AM | #2 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: can the HEI conv be done to a 77
Won't work on points/condenser ignition
|
07-01-2009, 12:14 PM | #3 |
Not Yet Wild
Join Date: Jun 2009
Posts: 13
|
Re: can the HEI conv be done to a 77
Hello you can actually use point to fire your HEI I done this before I love to tinker here is a link to a web site where a person done it http://www.geocities.com/loudgpz/GPZ...ForPoints.html
I done it much simpler than this person done it but you can do it either way this is how I done it first the points have to be gaped at what ever the manufacture sets them at they must open and close and make good contact I use a light connected from + on battery then the other end to the points I turn the motor over and make sure the light flashes then I know im good to go if it dosnt then you have to check points you must remove the condenser from the circuit G goes to ground W goes to points with condenser disconnected B goes to + on coil and to + from ignition switch C goes to -on coil the module must be grounded and be on a heat sink of some kind aluminum works best hope this helps if you have any questions feel free to ask |
07-01-2009, 03:20 PM | #4 |
Not Yet Wild
Join Date: Mar 2009
Posts: 12
|
Re: can the HEI conv be done to a 77
ok i got it, makes sence... that will take care of the spark... what about the charging curcuit? how is that set up or is the starting/charging the same thing, just the engine spins faster than the starting winding can crank and this causes it to charge...
|
07-02-2009, 11:47 AM | #5 |
Not Yet Wild
Join Date: Jun 2009
Posts: 13
|
Re: can the HEI conv be done to a 77
Hello im' not 100% on the starting charging theory but I believe what you stated is correct I believe I have scene on some wiring schematics that on some carts there is a starter cut out after it starts it removes power from the starter windings and just the generator part of the gen/starter is active I hope this helps
|
07-03-2009, 11:15 PM | #6 |
Not Yet Wild
Join Date: Mar 2009
Posts: 12
|
Re: can the HEI conv be done to a 77
i just wanted to report that what turbopower reported to me will not work on the ezgos... there need to be a singnal inverter used to invert the singnal from the points.... im working on it and should be about use it... ill let ya all know
|
|
|
Similar Threads | ||||
Thread | Forum | |||
New and used G2 parts, Big Block conv, etc | Golf Carts and Parts | |||
Electric to Gas conv | Big Block Talk! | |||
48v conv ? | Electric EZGO |