adjusting TXT shift cables

ted4420 · 10-27-2009, 08:21 PM

I have looked in Ezgo manual no. 28627-G01 and Differential manual 27660-G01. I can't find Ezgo's procedures for adjusting shift cables. Can someone post a Ezgo page on this adjustment. Thanks, Ted

scottyb · 10-27-2009, 08:39 PM

Teddy, 1 3/16 from the washer to the end of the threads... the nut is included in this space

ted4420 · 10-27-2009, 09:03 PM

Scotty, What about the threads on the on the jam nuts that hold the cables to the lower brkt. Does this just take up the slack in the cables? Thanks, Ted

tonyton · 10-27-2009, 09:09 PM

Owners manual #28475-G01 has the info. It's under power train maintenance. It shows the adjuster in neutral and shows the spring tension measurement at 1 3/8" or 3.49 cm. I think you can see it in the photo.

scottyb · 10-27-2009, 09:12 PM

There ya go , I stand corrected thank you Tony

tonyton · 10-27-2009, 09:15 PM

Quote:

Originally Posted by scottyb

There ya go , I stand corrected thank you Tony

scottyb · 10-27-2009, 09:19 PM

whatever

scottyb · 10-27-2009, 09:21 PM

ted, did you get your question answered? ... about the lower nut?

ted4420 · 10-28-2009, 07:00 PM

Scotty, I didn't get an answer on the lower nuts. Thanks Tonyton, If there are more photo's on the asjustments , please send them. Thanks, Ted

scottyb · 10-28-2009, 07:27 PM

Ted I have seen those cables adjusted from 1 3/8 below the nut to 1 3/16 th above the nut and they all worked..... so there must be an awful lot of forgiveness in those cable setups...... are you having trouble with some?

10-27-2009, 08:21 PM	#1
ted4420 Gone Wild Join Date: Nov 2007 Location: Highland,CA Posts: 240	adjusting TXT shift cables I have looked in Ezgo manual no. 28627-G01 and Differential manual 27660-G01. I can't find Ezgo's procedures for adjusting shift cables. Can someone post a Ezgo page on this adjustment. Thanks, Ted

10-27-2009, 09:03 PM	#3
ted4420 Gone Wild Join Date: Nov 2007 Location: Highland,CA Posts: 240	Re: adjusting TXT shift cables Scotty, What about the threads on the on the jam nuts that hold the cables to the lower brkt. Does this just take up the slack in the cables? Thanks, Ted

10-27-2009, 09:12 PM	#5
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: adjusting TXT shift cables There ya go , I stand corrected thank you Tony

10-27-2009, 09:21 PM	#8
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: adjusting TXT shift cables ted, did you get your question answered? ... about the lower nut?

10-28-2009, 07:00 PM	#9
ted4420 Gone Wild Join Date: Nov 2007 Location: Highland,CA Posts: 240	Re: adjusting TXT shift cables Scotty, I didn't get an answer on the lower nuts. Thanks Tonyton, If there are more photo's on the asjustments , please send them. Thanks, Ted

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-27-2009, 08:39 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: adjusting TXT shift cables Teddy, 1 3/16 from the washer to the end of the threads... the nut is included in this space

10-28-2009, 07:27 PM	#10
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: adjusting TXT shift cables Ted I have seen those cables adjusted from 1 3/8 below the nut to 1 3/16 th above the nut and they all worked..... so there must be an awful lot of forgiveness in those cable setups...... are you having trouble with some?

Similar Threads
Thread	Forum
Differential Shift Arm	Big Block Talk!
Intermediate shift	Electric EZGO
hard to shift	Gas Club Car
Electric shift	Big Block Talk!
shift eez	Gas Yamaha