|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-13-2009, 07:54 PM | #1 |
Getting Wild
Join Date: Feb 2009
Location: Northern Indiana
Posts: 84
|
Spindle Lift Added To Drop Lift
Haven't looked in any past post, I have 2005 TXT gas EZGO with 5'' drop axle lift. Thought I might lift the cart a little higher, I've got 2.5 inch spacers ready to be installed for each wheel and wanting to know if anyone has added spindle lift to drop lift. Will it work or make the cart unstable? Not using the cart offroad, Only on gravel, grass & pavement.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-13-2009, 08:56 PM | #2 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Spindle Lift Added To Drop Lift
You're going to have to drop the front motor mount if you lift it that much.
|
|
|
11-16-2009, 12:35 PM | #3 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: Spindle Lift Added To Drop Lift
A co-worker did the same thing, got the factory 5" lift and than put a jakes 6" on top of that. He is running 30" ATv tires. His cart is electric so the frt motor mount is no problem. He just rides it aournd the hous, no offroad. He did have to upgrade motors and controller.
I havn't seen it, just going by what he said. I am pretty sure it is doable, but you will have to use common sense when driving it. |
11-16-2009, 02:09 PM | #4 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Spindle Lift Added To Drop Lift
Wouldn't it make the tie rod down kinda low, I'd be afraid of it hitting something. Just a thought.
|
12-04-2009, 02:42 PM | #5 | |
Gone to refill cooler...
Join Date: Nov 2009
Location: Sacramento, California
Posts: 1,445
|
Re: Spindle Lift Added To Drop Lift
Quote:
|
|
12-06-2009, 08:11 AM | #6 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Spindle Lift Added To Drop Lift
if you want it taller i'd go with blocks between the springs and body, you could fit huge tires on with that combo. if you going with some 44" tires though you'll need to re-think your whole dropaxle setup. anything over 6" lift and you need to drop the engine in the front, they starve for oil when setting at those angles
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Drop Axle Lift Kit | Gas EZGO | |||
Axle lift vs. Spindle lift- Pros and Cons | Lifted Golf Carts | |||
Axle lift vs. Spindle lift- Pros and Cons | Electric EZGO | |||
Lift Or Drop ??? | Members Rides |