lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car
Gas Club Car Gas DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-15-2010, 05:50 PM   #1
mr.roper4
Not Yet Wild
 
Join Date: Nov 2010
Posts: 2
Default "smoking gas engine"

Just freshened 341 c.c. club car flat head engine. New rings with .006 end gap. Cyclinder and piston within clearance tolerances after cyclinder hone. Used after market rings. Exhaust valve stem a little loose, intake good. Pumping alot of oil and smoking bad. Disassembled again thinking may have a broken ring. Everything was as assembled. This engine has a splash oiling system and valves in the block. Can the new rings suck oil up through the intake valve. Going to install new club car rings and both valves however I do not want to have to take it apart again. any suggestions???
mr.roper4 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-16-2010, 08:23 AM   #2
clubcarjeff
Gone Wild
 
clubcarjeff's Avatar
Club Car
 
Join Date: Jun 2008
Location: Austin, Tx area
Posts: 209
Default Re: "smoking gas engine"

Have you done a compression test? you also didn't say if it was burning oil or not. New rings will take a bit to seat.
clubcarjeff is offline   Reply With Quote
Old 11-16-2010, 10:18 AM   #3
mr.roper4
Not Yet Wild
 
Join Date: Nov 2010
Posts: 2
Default Re: "smoking gas engine"

YES, it is smoking badly. Have not done a compression test.
mr.roper4 is offline   Reply With Quote
Old 11-16-2010, 11:15 AM   #4
invalidsession
Gone Wild
E-Z-GO
 
Join Date: Aug 2009
Location: Eldon Missouri
Posts: 977
Default Re: "smoking gas engine"

Quote:
Originally Posted by mr.roper4 View Post
Just freshened 341 c.c. club car flat head engine. New rings with .006 end gap. Cyclinder and piston within clearance tolerances after cyclinder hone. Used after market rings. Exhaust valve stem a little loose, intake good. Pumping alot of oil and smoking bad. Disassembled again thinking may have a broken ring. Everything was as assembled. This engine has a splash oiling system and valves in the block. Can the new rings suck oil up through the intake valve. Going to install new club car rings and both valves however I do not want to have to take it apart again. any suggestions???
Sounds like that might be your problem; oil seeping down the the valve stem will be burnt in the combustion chamber.

Chris.
invalidsession is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
"slow" Precedent "need Speed" Gas Club Car
1993 Gas Par Car solenoid "smoking" Gas Columbia ParCar
Wheels and Tires in So Cal 22" paddles on Douglas, 25" Dunlop on ITP, 27" ITP's Golf Carts and Parts
89" Marathon with 4" lift....can I fit 23" tires??? Electric EZGO


All times are GMT -5. The time now is 05:44 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.