ezgo speed control

[macdaddy33]

I have a 1994 ezgo marathon i am switching out control box to a alltrax 556 which has 3 terminials my old one had 4 i have 2 wires i am not sure about they are the a2 wires one coming from motor other coming from f and r board wondering which terminal to put them on. thanks for help i can get.

[Sir Nuke]

Welcome to our happy little corner of the net, and to BGW. There is a BIG fridge on the back porch with anything you can think of in it...help yourself...of course only take what you can LEGALLY have. Make yourself at home on one of the big fluffy couches, kick your shoes off, put your feet up on one of the tables, yes we are allowed to do that, mom's, wives’, husbands, girlfriend’s and boyfriends here don't care....and take it easy.



oh...btw....every once in a while a food fight breaks out...so you may not want to wear nice clothes here.

Welcome!!

[NoleFan4Ever]

Welcome!

[scottyb]

Originally Posted by macdaddy33

I have a 1994 ezgo marathon i am switching out control box to a alltrax 556 which has 3 terminials my old one had 4 i have 2 wires i am not sure about they are the a2 wires one coming from motor other coming from f and r board wondering which terminal to put them on. thanks for help i can get.

The 4th controller terminal (A2) was eliminated in later models. It was discovered the 4 terminal controllers self destructed frequently. Here is the fix for replacing any 4 terminal series control with any 3 terminal series control;
Take the 2 cables connected to controller A2 and bolt them together and apply a liberal amount of insulating tape. Ideally you would replace the two cables with one longer cable going from the motor A2 to the F&R but, you get the idea this way - Good Luck

[macdaddy33]

Thanks so much i will give it a try.