|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
03-29-2021, 11:11 AM | #1 |
Not Yet Wild
Join Date: Mar 2021
Location: Minneapolis
Posts: 7
|
Cushman 36v golf cart
I bought a Cushman 36v golf cart and looks like forward and reverse asambly is bad. What part do I replace this with since it is too old and I can't find it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-26-2021, 05:47 AM | #2 |
Not Yet Wild
Join Date: Jul 2020
Location: North East Oklahoma
Posts: 58
|
Re: Cushman 36v golf cart
I also have a Cushman, probably best bet would get one for an EZGO or Club Car then figure out how to make it work. Probably will need to make/modify mounting bracket plus figure out how to adapt the knob or make the handle for the replacement switch work on your cart. Not going to be cheap or easy.
Depending on what is wrong with the one you have might be able to buy a new piece of phenolic, drill the holes and transfer the switch parts over. |
05-10-2021, 06:32 PM | #3 | |
Not Yet Wild
Join Date: Mar 2021
Location: Minneapolis
Posts: 7
|
Re: Cushman 36v golf cart
Quote:
|
|
05-22-2021, 02:14 AM | #4 |
Not Yet Wild
Join Date: Jul 2020
Location: North East Oklahoma
Posts: 58
|
Re: Cushman 36v golf cart
Actually that doesn't look too terribly bad, Looks like it could be cleaned up and made to work almost as good as new. It has been hot but the copper pieces and board are still intact and can be salvaged.
|