|
Lifted Golf Carts Off-Road Golf Carts. |
|
Thread Tools | Display Modes |
12-10-2009, 08:54 PM | #1 |
Not Yet Wild
Join Date: Dec 2009
Posts: 4
|
How can you reprogram a Curtis 1268
I have a cart that is equipped with a Curtis SepEx 1268 controller. My problem is that the cart has very little low end torque. I barely can roll over a 9" curb. Supposedly, the controller can be programmed to give me more torque and there is very great directions on Curtis's web site on how to do it. The catch is, it requires me to have a programmer 1311 (costing more than $400). No one around my parts of lower Al is equipped with one of these hand held programmers to interface with my controller. Is there another way to accomplish this without breaking my bank account?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-10-2009, 11:32 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: How can you reprogram a Curtis 1268
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone using a Curtis 1268 Sepex controller | Extreme DC! | |||
Curtis PMC | Electric EZGO | |||
Help ID an old Curtis Controller ??? | Extreme DC! | |||
Curtis Potentionmeter PB-15 | Golf Carts and Parts | |||
Need help locating 5K-0 Curtis PB-6 | Electric Club Car |