|
09-25-2009, 11:09 PM
|
#1 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,402
|
1986 Flathead rebuild
I got an old CC with a flathead engine removed..... and a rebuild kit
 It sat for awhile......... finally I had to do it. I took the motor and set it upon a milk crate and pressure washed the tons of gunk off of it and carefully started tearing it down. I took my time and took pics for reassemble reference. I got her back together and fired up today .... thought I would post some pics in case anyone else was interested to try such a thing.... it was a fairly simple engine. We bored it .050 over and milled the head .050 also for a little extra compression but not enough to mess with the starter... The flathead has a removable cylinder just like a 2 stroke if you think you just want to do a top end, it is real do-able. I saw I wasn't the first one in there by the red make a gasket  Club Car used these Kawasaki kf82 341 motors from 1982-1991 they are 4 stoke. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-25-2009, 11:12 PM
|
#2 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,402
|
Re: 1986 Flathead rebuild
The remachined parts looked like this........
|
|
|
|
|
09-25-2009, 11:15 PM
|
#3 | |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: 1986 Flathead rebuild
Quote:
 |
|
|
|
|
09-25-2009, 11:16 PM
|
#4 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,402
|
Re: 1986 Flathead rebuild
Quote:
|
|
|
|
|
|
09-25-2009, 11:18 PM
|
#5 |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: 1986 Flathead rebuild
cute little guy.
|
|
|
|
|
09-25-2009, 11:18 PM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,402
|
Re: 1986 Flathead rebuild
There has to tens of thousands of these out there.....
 It is a real practical rebuild for the little $$$ it costs...... |
|
|
|
|
09-25-2009, 11:20 PM
|
#7 |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: 1986 Flathead rebuild
did the old guy up road do the boring.
|
|
|
|
|
09-25-2009, 11:31 PM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,402
|
Re: 1986 Flathead rebuild
YEP! OLD Guy milled the head too.... I had to stop him... He would have taken twice as much but, I was worried the belt starter may have trouble
|
|
|
|
|
09-28-2009, 10:26 AM
|
#9 |
|
Not Yet Wild
Join Date: Sep 2008
Location: Fleetwood, PA
Posts: 54
|
Re: 1986 Flathead rebuild
looks good!
Mine is still chugging along but I plan to rebuild mine when it goes! |
|
|
|
|
11-08-2009, 12:27 AM
|
#10 | |
|
Not Yet Wild
Join Date: Oct 2009
Location: royal palm beach fl
Posts: 39
|
Re: 1986 Flathead rebuild
Quote:
|
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Oil Splasher/Wiper at base of rod? '86 flathead | Gas Club Car | |||
| 1986 ezgo engine rebuild | Gas EZGO | |||
| New Member-Blown Flathead | Gas Club Car | |||
| 90' Flathead Engine Shaft | Gas Club Car | |||
| drop in engine for old flathead | Gas Club Car | |||
Linear Mode
