lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-16-2011, 09:09 PM   #11
scottyb
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 70,650
Default Re: Melex 412

Check batteries first! All tests (except pot output) depend upon testing with a good battery pack. Yours is a pretty simple machine. Lets get those batteries up and remove the resistor on the solenoid and tell me if it still passes current when it clicks.
scottyb is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-17-2011, 01:04 PM   #12
Trollhole
Not Yet Wild
 
Join Date: Oct 2011
Posts: 25
Default Re: Melex 412

Quote:
Originally Posted by bonduranth View Post
tHATS 5000 OHMS OR COMMON DESIGNATION IS 5k. It is the same pot box use in the early ez-go models with a controller. Melex is a copy of EZ-GO.
Yeah my bad.
Trollhole is offline   Reply With Quote
Old 11-19-2011, 01:17 PM   #13
bham57
Not Yet Wild
 
Join Date: Oct 2011
Posts: 7
Default Re: Melex 412

where is the best/ cheapest place to by 6v batteries? Should I replace all or just the worst/ lowest spec gravity one?
bham57 is offline   Reply With Quote
Old 12-11-2011, 09:16 PM   #14
bham57
Not Yet Wild
 
Join Date: Oct 2011
Posts: 7
Default Re: Melex 412

Quote:
Originally Posted by Trollhole View Post
You can check the pot box by pulling the blue and black wires off the controller and putting a multimeter to it and check ohms. your looking for something around 0 K ohms when the pedal isn't pressed and around 5 at full power. Another way is to go to radio shack and buy a 5k potentiometer and hook two wires up to it and the controller in place of the black and blue wires. And press the pedal and turn the pot up and see if you move. The potentiometer is only $3 FROM RADIO SHACK. If it is the problem you will have to buy a new one. If your not good with soldering as it has quite a few resisters and such I would recommend getting a whole new pot box.

Also is your solenoid clicking when you press the pedal?
Thanks, TrollHole..it was the pot box...and I went to radio shack and bought a 10k potentiometer..Took the pot box apart & Found the 2 wires broken off.

have solder back on and it works!!!
bham57 is offline   Reply With Quote
Old 08-23-2013, 06:08 AM   #15
1dodgee
Not Yet Wild
 
Join Date: Nov 2011
Posts: 35
Default Re: Melex 412

Where do I fine wiring diagram for Melex 412 POT BOX with CURTIS SPEED COONTOL?
1dodgee is offline   Reply With Quote
Old 08-23-2013, 07:50 AM   #16
bonduranth
Gone Wild
Yamaha
 
Join Date: Mar 2009
Location: Raleigh NC & Bracey VA
Posts: 156
Default Re: Melex 412

Use the diagram for the same year EZ-GO. ALL of the wiring is the same. Even the same controller.
bonduranth is offline   Reply With Quote
Old 08-23-2013, 10:08 AM   #17
1dodgee
Not Yet Wild
 
Join Date: Nov 2011
Posts: 35
Default Re: Melex 412

Thanks
1dodgee is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Thread Tools
Display Modes


Similar Threads
Thread Forum
Melex gas.... Golf Carts and Parts
melex 512 Melex
Need help for Melex Melex
3 12v or 6 6v? Melex 112 Electric golf carts


All times are GMT -5. The time now is 01:46 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.