|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-28-2010, 12:49 PM | #1 |
Not Yet Wild
Join Date: Jan 2010
Location: Kansas
Posts: 38
|
Solenoid on '98 CC 36 Volts
I have my '98 club car home from the golf course to do some maintenance, and i noticed that on top of the solenoid there are two red leads that look like they have been cut. They don't go any where now. Any ideas. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-28-2010, 01:26 PM | #2 |
Gone Wild
Join Date: Sep 2009
Location: Forest City N.C.
Posts: 2,660
|
Re: Solenoid on '98 CC 36 Volts
Do they go to a little white box that is ziptied to the frame by the solenoid.
|
01-28-2010, 03:37 PM | #3 |
Not Yet Wild
Join Date: Jan 2010
Location: Kansas
Posts: 38
|
Re: Solenoid on '98 CC 36 Volts
No there is nothing zipped to the solenoid. After closer look, one of the lines was a red wire and the other a black wire.
|
01-28-2010, 03:49 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Solenoid on '98 CC 36 Volts
Can you post a pic of the situation?
|
01-28-2010, 03:49 PM | #5 |
Gone Wild
Join Date: Sep 2009
Location: Forest City N.C.
Posts: 2,660
|
Re: Solenoid on '98 CC 36 Volts
No,I meant zip tied to the frame. If thats what it is I am not sure what they are for as I have always seen them unhooked.
|
01-28-2010, 05:05 PM | #6 |
Not Yet Wild
Join Date: Jan 2010
Location: Kansas
Posts: 38
|
Re: Solenoid on '98 CC 36 Volts
|
01-29-2010, 01:01 PM | #7 |
Not Yet Wild
Join Date: Jan 2010
Location: Kansas
Posts: 38
|
Re: Solenoid on '98 CC 36 Volts
Here are the pics of my solenoid:
|
01-29-2010, 01:54 PM | #8 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,217
|
Re: Solenoid on '98 CC 36 Volts
Are they maybe reverse buzzer?
|
01-29-2010, 02:11 PM | #9 |
Gone Wild
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
|
Re: Solenoid on '98 CC 36 Volts
I only thing I can think of would be a Pre-charged Resistor? This is used to minimize the arcing across the contacts inside the solenoid. On a 36 volt system it should be 250 OHM 10 Watt unit.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G16 on 40 volts | Electric Yamaha | |||
36 volts..12 volts accessories..?? | Electric Club Car | |||
64 volts on a bad boy? | Extreme DC! | |||
ok i HAVE- 50.3 VOLTS- | Electric EZGO | |||
ITS w/ 72 volts | Extreme DC! |