DCX IQ install

[cheapjeep2]

Quick question, the IQ controller has a small 4 pin connector that is has a red, green, black and another color wire with each having yellow stripe. But I don't see a place for this connector on the IQ adapter for the DCX controller. Is this connection used or is is abandoned in the new setup? I've referenced the AllTrax web site but not finding the answer.

[scubabud]

Originally Posted by cheapjeep2

Quick question, the IQ controller has a small 4 pin connector that is has a red, green, black and another color wire with each having yellow stripe. But I don't see a place for this connector on the IQ adapter for the DCX controller. Is this connection used or is is abandoned in the new setup? I've referenced the AllTrax web site but not finding the answer.

That 4 pin is where the CC's programmer plugs into. It's not needed with your Alltrax. Those wires go outside to another plug, either under your F&R switch or under the dash on a Precedent.

[cheapjeep2]

Originally Posted by scubabud

That 4 pin is where the CC's programmer plugs into. It's not needed with your Alltrax. Those wires go outside to another plug, either under your F&R switch or under the dash on a Precedent.

Thanks, and thinking about it while driving into work I came to that same conclusion. Was two tired to chase the wires last night, thanks though for the confirming my thoughts.