|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-10-2015, 06:21 PM | #1 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
V-twin + UMAX secondary spring?
Hey does anyone have a V-twin in their Yamaha and using a umax spring in the secondary clutch? What kind of preload you are using? Preload numbers? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-10-2015, 07:13 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: V-twin + UMAX secondary spring?
Just my 2 cents worth, I would start with the stock spring set at "B-4". The torque from your V-Twin is so much more then stock. If you wanted more torque, Umax spring set at B-3 or B-4.
|
02-10-2015, 07:17 PM | #3 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: V-twin + UMAX secondary spring?
I agree. The lower the spring pressure on the secondary, the happier you will be.
|
02-10-2015, 07:48 PM | #4 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: V-twin + UMAX secondary spring?
Ok. New plan. Right now I have the stock G1 spring in it with a .400 shim to put more compression on it. That's how it was with my stock G1 set up and clone set up. I'm going to remove the shim and use the stock G1 spring by itself.
|
02-10-2015, 07:52 PM | #5 | |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: V-twin + UMAX secondary spring?
Quote:
Then adjust the primary to work how you want it to. |
|
02-10-2015, 11:55 PM | #6 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: V-twin + UMAX secondary spring?
The old spring could be worn out Gary. Try it and see.
|
02-11-2015, 07:43 AM | #7 |
Gone Wild
Join Date: Mar 2012
Location: CENTRAL PENNSYLVANIA
Posts: 1,466
|
Re: V-twin + UMAX secondary spring?
ok now that we have a yamaha in the driveway that may be getting a twin i will need to know what works here
|
02-11-2015, 08:42 AM | #8 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: V-twin + UMAX secondary spring?
Whatcha got Rich?
|
02-11-2015, 09:30 AM | #9 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: V-twin + UMAX secondary spring?
With the big block engines, you want to use a stock spring in the driven clutch. I set mine at B2, feels great.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
02-11-2015, 03:59 PM | #10 |
Gone Wild
Join Date: Jan 2014
Location: South Jersey
Posts: 623
|
Re: V-twin + UMAX secondary spring?
Yea I just installed my twin with a plowmans spring and sheave and it falls on its face after take off. Ill change springs back to stock and report back. Should I keep the plowmans sheave in or run the stock one?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
purchase umax spring | Gas Yamaha | |||
Umax secondary spring | Gas Yamaha | |||
How to know which hole to put yamaha umax spring tangs in | Gas Yamaha | |||
secondary spring | Gas Yamaha | |||
09 ST secondary spring | Gas EZGO |