|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-14-2011, 12:10 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Arkansas
Posts: 2
|
89 Marathon GX444 Piston Clearance
Looking for the maximum allowable piston clearance for a 1989 E-Z-Go Marathon with GX444 (Robin EC25-3PG) 2-cycle engine. The rings are shot but the piston and cylinder is in pretty good shape, however, the skirt clearance is .007. Not familiar with this particular engine, but that seems a little high???
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-14-2011, 08:27 AM
|
#2 |
|
no clue
 Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: 89 Marathon GX444 Piston Clearance
.007 is the max according to ez-go. if the cyl. wall is smooth i would just lightly deglaze it and p/u a piston and ring kit. then you can be sure of a pretty good fit.
and welcome to BGW. |
|
|
|
|
09-14-2011, 09:19 AM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Arkansas
Posts: 2
|
Re: 89 Marathon GX444 Piston Clearance
 Thanks madoc1 for the welcome and the info. This points me in the direction needed. Thanks Again!! |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| piston to cyl clearance | Gas EZGO | |||
| 1992 ezgo gx444 | Gas EZGO | |||
| 1985 EZGO Model - Marathon or GX440 or GX444? | Gas EZGO | |||
| CLUB CAR (1991) piston to cylinder wall clearance | Gas Club Car | |||
| 35 HP Vangaurd Piston to Valve Clearance | Big Block Talk! | |||
Linear Mode
