|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-01-2014, 07:33 PM | #11 |
Gone Wild
Join Date: Nov 2012
Location: Southeastern Pa.
Posts: 319
|
Re: Carburetor spacer bolt
If enough of it is sticking out of the head, you could try grinding a slot into it with a Dremel tool, or grabbing the edge with a pair of diagonal cutters and twisting out. Or get an easy out.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-02-2014, 11:57 AM | #12 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Carburetor spacer bolt
Did you try the "Grabbit" yet?
|
08-04-2014, 10:06 PM | #13 |
Not Yet Wild
Join Date: May 2014
Location: Illinois
Posts: 16
|
Re: Carburetor spacer bolt
Well I got the hole carefully drilled all the way through it with my dremel broke an easy out in it but luckily tapped the broken piece out, used a bigger easy out but it's not coming out
|
08-04-2014, 10:11 PM | #14 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Carburetor spacer bolt
Heat & oil, then heat & oil are your friend, this obviously aint gonna be easy.
|
08-05-2014, 08:37 PM | #15 |
Not Yet Wild
Join Date: May 2014
Location: Illinois
Posts: 16
|
Re: Carburetor spacer bolt
Wheres the best place to get a new head?... Thanks
|
08-05-2014, 09:34 PM | #16 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Carburetor spacer bolt
Not sure what head you want? Pull the head off and take it to a shop and have them drill it out and tap it, if you can't do it
|
08-07-2014, 05:41 PM | #17 |
Gone Wild
Join Date: Aug 2014
Location: Texas
Posts: 250
|
Re: Carburetor spacer bolt
On the portion that is sticking out try using a Dremel tool with a cutoff blade to make a screwdriver slot in it. Using a screwdriver and medium heat try to remove it this way.
Good Luck. PS: Sorry SandbaggerYDRA I didn’t see your post before I posted on this subject. |
08-08-2014, 06:24 PM | #18 | |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Carburetor spacer bolt
Quote:
|
|
08-09-2014, 05:12 PM | #19 |
Gone Wild
Join Date: Aug 2014
Location: Texas
Posts: 250
|
Re: Carburetor spacer bolt
|
08-10-2014, 11:02 AM | #20 |
Not Yet Wild
Join Date: May 2014
Location: Illinois
Posts: 16
|
Re: Carburetor spacer bolt
I finally got it. Now I need to figure out why its running so hot
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Clutch Spacer? | Big Block Talk! | |||
Starter Bolt Broke Use other bolt question | Electric EZGO | |||
Carb Spacer | Clone Engine Swaps | |||
wheel spacer help!!!! | Electric EZGO | |||
96 DS stock drive clutch bolt size (exterior bolt) | Gas Club Car |