1995 ez-go twin no fire

bogeyman · 04-21-2010, 08:59 PM

The test light is on when i touch the pos on the coil, when i spin the engine the test light goes off and stays off, no flashing

chardonite · 04-22-2010, 10:49 AM

What does it do on the coil -?

bogeyman · 04-22-2010, 12:00 PM

the test light goes dim

bogeyman · 04-22-2010, 06:55 PM

I just swapped out the igniter, new coil, still no fire, it would have to be the pulser i would think, how do you set the air gap on the pulser, if i can find one, thanks for the help so far.

bogeyman · 04-22-2010, 07:27 PM

i also tested the pulsar coil with a meter, on ac volts with engine turning over it read .1 volts, on ohms scale it read 19.8 and according to manual i downloaded it should read 450.06 to 500 something does this sound right, thanks

chardonite · 04-22-2010, 08:00 PM

Sounds like you found a bad pulser coil.

ez go go · 04-22-2010, 08:17 PM

I would gap it about the thickness of a buisness card. Just check it out befor rebolting the cover back on. Use a continuity meter to check signal confirmation as the flywheel turns and to make sure there is no contact. Let us know how it goes.

bogeyman · 05-15-2010, 08:44 AM

Ok, well finally got the pulsar coil, and away she goes, i want to thank you and the other members for all the help. maybe i can be of some help in the future,

ez go go · 05-15-2010, 01:06 PM

On behalf of BGW, glad to help!!

madoc1 · 06-06-2010, 05:53 PM

great info. having a similar prob. does anyone know the correct ohms for a 89 epg? two different pulsers read 155-156. does this sound about right? jim

04-21-2010, 08:59 PM	#11
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76	Re: 1995 ez-go twin no fire The test light is on when i touch the pos on the coil, when i spin the engine the test light goes off and stays off, no flashing
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76

04-22-2010, 10:49 AM	#12
chardonite Gone Wild Join Date: Jul 2009 Location: Chardon Ohio Posts: 257	Re: 1995 ez-go twin no fire What does it do on the coil -?

04-22-2010, 12:00 PM	#13
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76	Re: 1995 ez-go twin no fire the test light goes dim
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76

04-22-2010, 06:55 PM	#14
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76	Re: 1995 ez-go twin no fire I just swapped out the igniter, new coil, still no fire, it would have to be the pulser i would think, how do you set the air gap on the pulser, if i can find one, thanks for the help so far.
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76

04-22-2010, 07:27 PM	#15
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76	Re: 1995 ez-go twin no fire i also tested the pulsar coil with a meter, on ac volts with engine turning over it read .1 volts, on ohms scale it read 19.8 and according to manual i downloaded it should read 450.06 to 500 something does this sound right, thanks
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-22-2010, 08:00 PM	#16
chardonite Gone Wild Join Date: Jul 2009 Location: Chardon Ohio Posts: 257	Re: 1995 ez-go twin no fire Sounds like you found a bad pulser coil.

04-22-2010, 08:17 PM	#17
ez go go Doin' the Wild Thang Join Date: Mar 2010 Location: Greenville, AL Posts: 1,063	Re: 1995 ez-go twin no fire I would gap it about the thickness of a buisness card. Just check it out befor rebolting the cover back on. Use a continuity meter to check signal confirmation as the flywheel turns and to make sure there is no contact. Let us know how it goes.

05-15-2010, 08:44 AM	#18
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76	Re: 1995 ez-go twin no fire Ok, well finally got the pulsar coil, and away she goes, i want to thank you and the other members for all the help. maybe i can be of some help in the future,
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76

05-15-2010, 01:06 PM	#19
ez go go Doin' the Wild Thang Join Date: Mar 2010 Location: Greenville, AL Posts: 1,063	Re: 1995 ez-go twin no fire On behalf of BGW, glad to help!!

06-06-2010, 05:53 PM	#20
madoc1 no clue Join Date: Sep 2009 Location: spicewood, texas Posts: 3,308	Re: 1995 ez-go twin no fire great info. having a similar prob. does anyone know the correct ohms for a 89 epg? two different pulsers read 155-156. does this sound about right? jim

Similar Threads
Thread	Forum
G2 No fire	Gas Yamaha
Ez-Go, No fire	Gas EZGO
fire	Test Post
Ez Go On Fire	Electric EZGO
fire	Videos