|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-17-2019, 07:07 PM | #1 |
Not Yet Wild
Join Date: Jul 2019
Location: Maine
Posts: 9
|
G2 Airbox suggestions
Just brought home a G2 1985. First cart.
Opened the seat and saw a bare carb. Googled around the web and only saw a complete box setup on an auction site with a price almost what I paid for the cart. In other words a bit steep at the moment. Anyone have any suggestions for any DIY box or perhaps point me in the direction of a used box? Thank you Guy Maine............. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-17-2019, 07:22 PM | #2 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: G2 Airbox suggestions
Try the buy/sell section here.
Unfortunately these engines are extremely finicky and it will never run right without the stock airbox. Even the lid being a little loose can cause it to bog out like crazy. |
07-17-2019, 07:51 PM | #3 | |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: G2 Airbox suggestions
Quote:
X2 to that. I had a G9 here, and the engine had been completely rebuilt but it would only run in full choke. The culprit? One of the rubber latches for the airbox was broken and the lid was lifted up a little bit. |
|
07-17-2019, 07:54 PM | #4 |
Not Yet Wild
Join Date: Jul 2019
Location: Maine
Posts: 9
|
Re: G2 Airbox suggestions
Well some sort of box / filter is going in there until I can find a replacement. The guy before was driving it with nothing on it...
Looked into 3d printing a box but have not found one drawn out yet.... Thank you |
07-17-2019, 08:09 PM | #5 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G2 Airbox suggestions
You can put a K&N type filter on it, but you'll wind up experimenting with drilling the jet to get it right...
|
07-17-2019, 09:27 PM | #6 |
Gone Wild
Join Date: Mar 2015
Location: Central mn
Posts: 1,036
|
Re: G2 Airbox suggestions
I can look if I have another air box, but I won’t be home till Sunday night.
I’ll try to remember to check then. |
07-18-2019, 06:14 AM | #7 |
Not Yet Wild
Join Date: Jul 2019
Location: Maine
Posts: 9
|
Re: G2 Airbox suggestions
|
07-18-2019, 07:26 AM | #8 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: G2 Airbox suggestions
If it had nothing on it and he drove it like that, I'd be very weary. Get a boroscope and look at the cylinder walls to make sure they arent scored from dirt and sand before going too far. Over boring these motors usually doesnt last long, and I'm not a huge fan of clone motors but it may be better off in the long run to drop one of those in.
|
07-22-2019, 09:06 PM | #9 |
Gone Wild
Join Date: Mar 2015
Location: Central mn
Posts: 1,036
|
Re: G2 Airbox suggestions
I’m sorry I do not have another air box.
|
07-23-2019, 05:07 PM | #10 |
Not Yet Wild
Join Date: Jul 2019
Location: Maine
Posts: 9
|
Re: G2 Airbox suggestions
Thanks for checking
|
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB Yam G9A airbox | Golf Carts and Parts | |||
Looking for a G9 Airbox lid or Complete Airbox | Gas Yamaha | |||
WTB: Looking for 92 up CC DS Airbox | Golf Carts and Parts | |||
airbox | Golf Carts and Parts | |||
Oil in Airbox | Gas EZGO |