08-07-2014, 03:22 PM | #1 |
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
GXT-800 Not Starting
2 stroke, has spark, roughly 90 psi on compression test, new carb, new fuel pump. I checked the reed valve, good head gasket and fuel lines.
I am getting little suction when I put my hand over the carb. Spraying starter spray won't get it to fire over either, what am I missing? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-07-2014, 03:38 PM | #2 |
Gone Wild
Join Date: Oct 2009
Location: Alva Fla
Posts: 608
|
Re: GXT-800 Not Starting
I'm no ez-go expert, but 90 psi is very low compression.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
g1 not starting | Gas Yamaha | |||
05 ST not starting | Gas EZGO | |||
OK this is what I'm starting with | Electric Club Car | |||
Starting the new buggy...starting from new this time. | Members Rides | |||
she's starting to shimmy....she's starting to shudder | Electric Club Car |