|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-12-2016, 11:40 AM | #1 |
Not Yet Wild
Join Date: Aug 2016
Posts: 5
|
1990 ez go marathon wiring diagram
I have 1990 marathon cart that needs rewiring. I have tested all micro switches and solenoid has new motor. I need the control wiring diagram for the switches and solenoid.The diagrams for the small wires on line aren't very definitive. Any help would be greatly appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-12-2016, 11:47 AM | #2 |
Guest
Posts: n/a
|
Re: 1990 ez go marathon wiring diagram
Wiring Diagram for 1989 to 1994 E-Z-GO with Curtis 1204 Electronic Motor Speed Controller
|
09-12-2016, 11:54 AM | #3 |
Not Yet Wild
Join Date: Aug 2016
Posts: 5
|
Re: 1990 ez go marathon wiring diagram
Sorry I should have stated that it has the old school resistors and no controller.
|
09-12-2016, 02:23 PM | #4 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,998
|
Re: 1990 ez go marathon wiring diagram
|
09-21-2016, 05:53 PM | #5 |
Not Yet Wild
Join Date: Aug 2016
Posts: 5
|
Re: 1990 ez go marathon wiring diagram
Thanks for the diagram. I have it wired but my resistor coil is heating up. How does the resistor work? Shouldn't the thinner coils be for high speed and the thicker coil is for slow speed? Please help.
|
09-21-2016, 06:36 PM | #6 |
Guest
Posts: n/a
|
Re: 1990 ez go marathon wiring diagram
resistor coils are made to burn off current
yes they get hot no thinner are for lower speed as there are more of them here is how club car works |
09-23-2016, 04:53 PM | #7 |
Not Yet Wild
Join Date: Aug 2016
Posts: 5
|
Re: 1990 ez go marathon wiring diagram
Thanks for the help but it is an ez go with the old school resistor coil. Should there be continuity between A-2 and the motor hosing?
|
09-23-2016, 05:03 PM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1990 ez go marathon wiring diagram
For the Ezgo make sure there is no cable connected to the lug where the wiper comes to rest at full pedal UP. Also see if the solenoid clicks each time you press the gas or just when you disconnect the battery main.
|
09-24-2016, 12:38 PM | #9 |
Not Yet Wild
Join Date: Aug 2016
Posts: 5
|
Re: 1990 ez go marathon wiring diagram
There is no wire to the first lug. I have an issue when I shift to reverse. It basically sends 36 volts to ground. I can put my meter on the negative terminal and touch any where metal on the cart and I have 36 volts It is going through S2 and A2 on the motor. The motor is new and if you disconnect all wires from it there is no continuity between the terminals and the housing. After hooking up S2 & A2 it shows continuity to the housing. Plus it fries my 12 volt wiring and blows radio fuse. Somehow 36 volts is back feeding into the 12 volt system. PLEASE HELP!!!
|
Tags |
ez go wiring |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGo 1990 2 stroke wiring diagram needed | Gas EZGO | |||
1990 2cyl wiring diagram | Gas EZGO | |||
1990 gas ez-go marathon wiring diagram | Gas EZGO | |||
1990 wiring diagram | Gas EZGO | |||
need wiring diagram for a 1990 cushman truckster | Gas golf carts |