|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-01-2015, 09:18 PM | #1 |
Not Yet Wild
Join Date: May 2014
Posts: 67
|
TXT body removal - rear bumper question
I went through the sticky on this issue which was great. However, do the rivets holding the rear black, plastic bumper need to be removed? This is not mentioned in the sticky but it seems it is holding in the body?
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-02-2015, 07:57 AM | #2 |
Gone Wild
Join Date: Dec 2014
Location: Dallas, TX
Posts: 247
|
Re: TXT body removal - rear bumper question
No, you shouldn't need to remove anything from the rear bumper. The body is not attached to it.
Can you post a photo? |
04-02-2015, 08:35 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: TXT body removal - rear bumper question
There is some attachment in the bagwell
|
04-02-2015, 09:15 PM | #4 |
Not Yet Wild
Join Date: May 2014
Posts: 67
|
Re: TXT body removal - rear bumper question
The plastic piece in the bagwell is removed. I will need to take another look at it but it seemed as if the black bumper was over the body. I did not get a chance to look at it again today.
Thanks |
04-02-2015, 09:56 PM | #5 |
Guest
Posts: n/a
|
Re: TXT body removal - rear bumper question
heres a 05 txt diagram i used
|
04-02-2015, 10:49 PM | #6 |
Not Yet Wild
Join Date: May 2014
Posts: 67
|
Re: TXT body removal - rear bumper question
So it looks like the rear bumper needs to come off?
Thanks |
|
|
Similar Threads | ||||
Thread | Forum | |||
J-clip removal question (rear body)... | Electric Club Car | |||
Rear bumper hardware size question | Electric EZGO | |||
EZ-GO Marathon front cowl removal -- And TXT body removal | Electric EZGO | |||
EZ-GO Marathon front cowl removal -- And TXT body removal | Gas EZGO | |||
G1 rear Body work question | Design Center |