Jake's 6" rear lift help

cdb770 · 05-20-2010, 06:45 AM

Anyone have pictures of the final install of a Jake's 6" rear axle lift on an electric cart for reference, to make sure I have evrything going the right way during my install. The instructions are very vague and do not show anything after the fact.

roady89 · 05-20-2010, 07:36 AM

See this.....well its wrong.

The bottom bracket is backwards. The short side should be towards the front.

Heres a pic of the right way. Crappy cell pic.

cdb770 · 05-20-2010, 08:17 AM

Thanks Roady, I think my shackle is different from the one you have, but the concept is the same I think. My shackle (lift) has a half round cut-out for the axle tube, and then has four long bolts that must go from the top to the bottom. But think it is the same from the top down:
1) shock bracket
2) leaf spring
3) shackle/lift block
4) axle with bolts going through it all (not sure of bolt position head on top or bottom, but will go with the laws of gravity keeping it in if the nuts come off)

cdb770 · 05-22-2010, 03:06 PM

All finished with the lift, now deciding if I want to leave the rear seat on, or get a box for the rear. My daughter was just itching to drive the cart this morning.

05-20-2010, 06:45 AM	#1
cdb770 Gone Wild Join Date: Apr 2010 Location: Michigan Posts: 153	Jake's 6" rear lift help Anyone have pictures of the final install of a Jake's 6" rear axle lift on an electric cart for reference, to make sure I have evrything going the right way during my install. The instructions are very vague and do not show anything after the fact.

05-20-2010, 07:36 AM	#2
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Jake's 6" rear lift help See this.....well its wrong. The bottom bracket is backwards. The short side should be towards the front. Heres a pic of the right way. Crappy cell pic.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

05-20-2010, 08:17 AM	#3
cdb770 Gone Wild Join Date: Apr 2010 Location: Michigan Posts: 153	Re: Jake's 6" rear lift help Thanks Roady, I think my shackle is different from the one you have, but the concept is the same I think. My shackle (lift) has a half round cut-out for the axle tube, and then has four long bolts that must go from the top to the bottom. But think it is the same from the top down: 1) shock bracket 2) leaf spring 3) shackle/lift block 4) axle with bolts going through it all (not sure of bolt position head on top or bottom, but will go with the laws of gravity keeping it in if the nuts come off)

Similar Threads
Thread	Forum
Jake's EZGO 6" spindle lift?	Lifted Golf Carts
Jake's 6" spindle lift on Club Car DS	Electric Club Car
Jake's 6" Spindle Lift Kit	Lifted Golf Carts
Jake's 6" Spindle Lift Kit Question	Electric Club Car
Installing Jake's 4" Lift Kit	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum