replacing a curtis 1206 with a 1204

mmesecke · 05-22-2010, 10:48 AM

Ok I am little brain dead this morning. I am trying to remember the wiring for this replacement. The 1206 is 5 pins with 4 wires, "red, black, white , orange" and and the 1204 has 3 connections, p1, p2, p3. ..P1 is the Key input, P2 and P3 are for the f/r control. . uuuuugh. This is far as I got. See I knew I should have gone to the Jimmy Buffett concert today, but decide to work on a friends cart. lol Any body got the solution.

roady89 · 05-22-2010, 11:39 AM

They don't/wont swap out like that. A 1206 is has an ITS throttle and a 1204 has a 0-5K ohm throttle.

p2 and P3 are for the 2 wires for 0-5k throttle input.

mmesecke · 05-22-2010, 02:23 PM

will a 1205 fit for the ezgo series cart?

roady89 · 05-22-2010, 03:47 PM

It will work for a series cart but it wont work with an ITS throttle. Anything with a 1206 is going to be ITS. Your either going to have to find another 1206 or an Alltrax AXE.

mmesecke · 05-22-2010, 05:32 PM

Many Thanks Roady

05-22-2010, 10:48 AM	#1
mmesecke Not Yet Wild Join Date: Aug 2008 Posts: 7	replacing a curtis 1206 with a 1204 Ok I am little brain dead this morning. I am trying to remember the wiring for this replacement. The 1206 is 5 pins with 4 wires, "red, black, white , orange" and and the 1204 has 3 connections, p1, p2, p3. ..P1 is the Key input, P2 and P3 are for the f/r control. . uuuuugh. This is far as I got. See I knew I should have gone to the Jimmy Buffett concert today, but decide to work on a friends cart. lol Any body got the solution.
mmesecke Not Yet Wild Join Date: Aug 2008 Posts: 7

05-22-2010, 11:39 AM	#2
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: replacing a curtis 1206 with a 1204 They don't/wont swap out like that. A 1206 is has an ITS throttle and a 1204 has a 0-5K ohm throttle. p2 and P3 are for the 2 wires for 0-5k throttle input.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

05-22-2010, 02:23 PM	#3
mmesecke Not Yet Wild Join Date: Aug 2008 Posts: 7	Re: replacing a curtis 1206 with a 1204 will a 1205 fit for the ezgo series cart?
mmesecke Not Yet Wild Join Date: Aug 2008 Posts: 7

05-22-2010, 03:47 PM	#4
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: replacing a curtis 1206 with a 1204 It will work for a series cart but it wont work with an ITS throttle. Anything with a 1206 is going to be ITS. Your either going to have to find another 1206 or an Alltrax AXE.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

05-22-2010, 05:32 PM	#5
mmesecke Not Yet Wild Join Date: Aug 2008 Posts: 7	Re: replacing a curtis 1206 with a 1204 Many Thanks Roady
mmesecke Not Yet Wild Join Date: Aug 2008 Posts: 7

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
WTB used curtis 1204 controller	Golf Carts and Parts
Used Curtis 1204 controller	Electric EZGO
Curtis 1206 Controller	Electric EZGO
looking for used curtis 1204 controller-91ezgo	Golf Carts and Parts
Curtis 1206 test ?	Electric EZGO