|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-30-2013, 07:43 PM | #1 |
Getting Wild
Join Date: Mar 2013
Location: Peachtree City GA
Posts: 117
|
Open field error with alltrax dcx300 on a 1996 or 1997 dcs
So my old controller died. It was melted and no longer worked. So I bought a Alltrax dcx300 and installed it today, when I turned it on I got 5 red blinks. which the manual says it means Open field. Can someone please direct me in repairing this?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-30-2013, 08:12 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 12,999
|
Re: Open field error with alltrax dcx300 on a 1996 or 1997 dcs
Just had the same problem with my 96, replaced the motor and it went away. Now that being said my controller is acting up also. Make sure to check the field wires going from the controller to the motor for wear and shorts.
|
10-30-2013, 08:49 PM | #3 |
Getting Wild
Join Date: Mar 2013
Location: Peachtree City GA
Posts: 117
|
Re: Open field error with alltrax dcx300 on a 1996 or 1997 dcs
Is there anyway I can test the motor? because before I changed the broken stock ezgo controller the motor ran fine on jack stands for about 5 seconds then the controller would cut off. So then doesn't that mean the motor still works?
|
10-30-2013, 09:15 PM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 12,999
|
Re: Open field error with alltrax dcx300 on a 1996 or 1997 dcs
Mine would work randomly. I haven't tried it but cheepjeep2 posted on my thread " New to me 96 DCS with Alltrax DCX 300 open field error " how to test a regen motor.
|
10-30-2013, 09:42 PM | #5 |
Getting Wild
Join Date: Mar 2013
Location: Peachtree City GA
Posts: 117
|
Re: Open field error with alltrax dcx300 on a 1996 or 1997 dcs
I'll test that tomorrow and let you know if it works or not.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
New to me 96 DCS with Alltrax DCX 300 open field error | Electric EZGO | |||
Alltrax SPM no error codes but not working | Extreme DC! | |||
Alltrax SPM "low throttle" error code | Electric EZGO | |||
1996 804 with 1997 350 cc has no power | Gas EZGO | |||
Field map change Alltrax | Electric EZGO |