Locked up 36 volt motor.

Stevegrmich · 02-12-2014, 07:42 AM

. . . removed . . .

scooterman · 02-12-2014, 08:07 AM

Good thought Steve but if he's rocking the cart back and forth to get it going, wouldn't that indicate something inside the motor?
I agree resetting the OBC would be easy enough to try, no harm and one less thing to eliminate.

mrgolf · 02-12-2014, 08:29 AM

Rocking the cart would make a bad connection change also.

jjance · 02-12-2014, 08:35 AM

Here's a question. Is there a OBC in a 94 cart? I looked at the schematics and didn't see one.

gornoman · 02-12-2014, 08:38 AM

Cart in question is 36v system and should not have an OBC. At least that is what I recall.

Stevegrmich · 02-12-2014, 09:11 AM

Quote:

Originally Posted by gornoman

Cart in question is 36v system and should not have an OBC. At least that is what I recall.

. . . yep, my bad . . . it's a 94 36V . . . disregard my previous post . . .

Stevegrmich · 02-12-2014, 09:18 AM

Quote:

Originally Posted by jjance

Here's a question. Is there a OBC in a 94 cart? I looked at the schematics and didn't see one.

. . . not sure about 94, but the 95 48v has an obc . . . he has a 94 36v, which is probably a resistor cart . . . I pulled the trigger on the obc without realizing exactly which cart was being discussed . . .

wirenut210 · 02-12-2014, 10:11 AM

I will try the one wheel thing tonight. If still locked I'm going to pull the motor. BUT, before I pull motor, can I hook 36 volts straight to motor, bypassing all controls? Jumper on 2 terminals? And 36 volt to the other 2 terminals?

wirenut210 · 02-12-2014, 10:19 AM

My # on the nameplate is A9411 371935. Makes it a 1994 model, correct? I don't see any resistors. There's some sort of controller mounted upside down under passenger side backrest area.

Stevegrmich · 02-12-2014, 10:36 AM

Quote:

Originally Posted by wirenut210

My # on the nameplate is A9411 371935. Makes it a 1994 model, correct? I don't see any resistors. There's some sort of controller mounted upside down under passenger side backrest area.

Correct . . A94 is a 1994 manufactured in the 11th week . . . there should be a bank of wire coils under the seat area (resistors) . . .

02-12-2014, 07:42 AM	#11
Stevegrmich Medicare Recipient Join Date: Jun 2011 Location: West Michigan Posts: 3,541	Re: Locked up 36 volt motor. . . . removed . . .

02-12-2014, 08:07 AM	#12
scooterman Gone Wild Join Date: Jan 2014 Location: Lafayette, Louisiana Posts: 1,677	Re: Locked up 36 volt motor. Good thought Steve but if he's rocking the cart back and forth to get it going, wouldn't that indicate something inside the motor? I agree resetting the OBC would be easy enough to try, no harm and one less thing to eliminate.

02-12-2014, 08:29 AM	#13
mrgolf Old Sky Soldier Join Date: Dec 2011 Location: Kentucky Posts: 3,881	Re: Locked up 36 volt motor. Rocking the cart would make a bad connection change also.

02-12-2014, 08:35 AM	#14
jjance Gone Wild Join Date: Feb 2011 Location: Chattanooga TN Posts: 2,105	Re: Locked up 36 volt motor. Here's a question. Is there a OBC in a 94 cart? I looked at the schematics and didn't see one.

02-12-2014, 08:38 AM	#15
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,286	Re: Locked up 36 volt motor. Cart in question is 36v system and should not have an OBC. At least that is what I recall.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-12-2014, 10:11 AM	#18
wirenut210 Not Yet Wild Join Date: Jun 2013 Posts: 9	Re: Locked up 36 volt motor. I will try the one wheel thing tonight. If still locked I'm going to pull the motor. BUT, before I pull motor, can I hook 36 volts straight to motor, bypassing all controls? Jumper on 2 terminals? And 36 volt to the other 2 terminals?
wirenut210 Not Yet Wild Join Date: Jun 2013 Posts: 9

02-12-2014, 10:19 AM	#19
wirenut210 Not Yet Wild Join Date: Jun 2013 Posts: 9	Re: Locked up 36 volt motor. My # on the nameplate is A9411 371935. Makes it a 1994 model, correct? I don't see any resistors. There's some sort of controller mounted upside down under passenger side backrest area.
wirenut210 Not Yet Wild Join Date: Jun 2013 Posts: 9

Similar Threads
Thread	Forum
What model 36 volt motor do I need for my 48 volt cart?	Electric Club Car
Locked up motor after long downhill run?	Electric Club Car
Motor Locked up - 88 Club Car	Gas Club Car
Motor locked up on a 1997 EZGO	Gas EZGO
Locked Motor	Gas EZGO