|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-17-2014, 06:37 PM | #1 |
Not Yet Wild
Join Date: Dec 2013
Posts: 50
|
Cart won't move ??
I have a 2010 CC Precedent Excel. I sent my motor to the boys at Plum Quik and the built me the Bandit. I told them I needed a 500 amp controller and they sent me the 500a Curtis controller and said it would work. Everything worked fine before the install, I did everything the directions said to a 'T', now the cart won't go forward or reverse. Any ideas why?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-17-2014, 09:29 PM | #2 |
Not Yet Wild
Join Date: Dec 2013
Posts: 50
|
Re: Cart won't move ??
fixed it, all good now!
|
04-17-2014, 09:37 PM | #3 |
Gone Wild
Join Date: Aug 2013
Location: Michigan
Posts: 508
|
Re: Cart won't move ??
Did the new 500 amp Curtis controller fit in the same mounting plate that the original 250amp did?
|
04-17-2014, 09:57 PM | #4 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Cart won't move ??
What was the fix?
|
04-17-2014, 10:02 PM | #5 |
Not Yet Wild
Join Date: Dec 2013
Posts: 50
|
Re: Cart won't move ??
It didn't fit where the old controller was, I had to move it to the back of the compartment.
The fix was a wire uplugged, the directions it came with showed the wire unplugged though. ? It doesn't have as much torque as I thought it would though. |
04-18-2014, 01:41 PM | #6 |
Gone Wild
Join Date: Aug 2013
Location: Michigan
Posts: 508
|
Re: Cart won't move ??
Wait until you get a heavy load on the cart, that's where it will be noticeable.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
cart won't move | Extreme DC! | |||
96 dcs cart won't move | Electric EZGO | |||
Cart will not move | Electric Club Car | |||
Cart won't move | Electric EZGO | |||
My Cart Won't Move | Gas EZGO |