|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-17-2013, 03:11 PM | #11 |
Not Yet Wild
Join Date: Nov 2008
Location: Shelby Twp,Mich
Posts: 21
|
Re: Setting governor linkage arm?
Hello: I too was in need for more speed and loosened the rear end nut . I want it hooked back up corectly before I damage the engine . Is the governor hook up the same for a 2006 Precedent car . Thank You Richard
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-18-2013, 06:50 AM | #12 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
|
Re: Setting governor linkage arm?
Yes it is!
My previous post is from my 2007 DS manual, Precedents and DS's have the same setup for the governor! |
05-24-2023, 09:20 AM | #13 |
Not Yet Wild
Join Date: Jan 2018
Location: Vero beach area Florida
Posts: 55
|
Re: Setting governor linkage arm?
I have a 2012 club car gas that needs this adjustment the governor arm has no movement C clockwise but a lot of movement clockwise
you are saying To loosen nut securing to rod put punch into at top of rod and turn rod CC to stop tighten gov. arm so that throttle cable is without slack between gov. arm and carb. |
05-24-2023, 06:45 PM | #14 |
Not Yet Wild
Join Date: Jan 2018
Location: Vero beach area Florida
Posts: 55
|
Re: Setting governor linkage arm?
After posting this I did some other checking and found that the throttle cable was frozen tried to loosen but can't ordered replacement
THANKS TO THIS FOURM !!!!!!!!!!!!!!!!!! |
05-26-2023, 03:33 PM | #15 |
Not Yet Wild
Join Date: Jan 2018
Location: Vero beach area Florida
Posts: 55
|
Re: Setting governor linkage arm?
This worked great on 2012 Club Car FE 350 D engine
Thanks to this forum !!!!!!!!! |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
84 cart throttle cable,linkage and governor concerns | Gas Club Car | |||
Throttle hooked to governor linkage on clone | Clone Engine Swaps | |||
Setting toe on a G-16 | Gas Yamaha | |||
the 27 hp kaw. is setting in the c.c. | Big Block Talk! | |||
Adjustment Of Governor/Linkage to help with lower gear/torque? | Gas EZGO |