10-25-2013, 03:13 AM | #1 |
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,156
|
Fe400?
Anyone ever install an fe400 into there machine? What would it take to replace a counter-clockwise engine with a clockwise rotation engine?
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-25-2013, 04:55 PM | #2 |
Gone Wild
Join Date: Jul 2012
Location: S.E. WIS
Posts: 176
|
Re: Fe400?
patience, time and good fab skills! With that, anything is possible
|
11-04-2013, 12:45 PM | #3 |
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,156
|
Re: Fe400?
Ok then can anyone tell me how these engines perform and if they are more prone to blowing up then normal? I was told they use aluminum piston rods rather then cast, but that's good for weight.
Please chime in if you can. Thanks |
11-05-2013, 10:01 AM | #4 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,846
|
Re: Fe400?
I've seen some transplants where they mounted the motor with the crank hub on the driver's side, and they use a jackshaft to change the direction and transfer the power back across behind the motor, mounting the clutch on the end of the jackshaft on the passenger side.
Here's a thread showing that. It's a clone motor but it's the same idea: http://www.buggiesgonewild.com/clone...jackshaft.html |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing the FZ340 with FE400 | Gas Club Car | |||
fe400 engine rpm | Gas Club Car | |||
FE400 install | Lifted Golf Carts | |||
FE400 Max RPM | Gas Club Car | |||
fe400 wanted | Golf Carts and Parts |