|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-30-2014, 10:17 AM | #1 |
Not Yet Wild
Join Date: Nov 2014
Location: Houston
Posts: 2
|
Yamaha adventurer 2+2 parts question
Does the Yamaha adventurer 2+2 use the same dash parts as the G29 drive? I am trying to get the dash locking glove boxes or a different insert where the cup holders are and I want to know if they are the same in the dash.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-30-2014, 01:15 PM | #2 |
Gone Wild
Join Date: Aug 2014
Location: Texas
Posts: 250
|
Re: Yamaha adventurer 2+2 parts question
I installed this dash in my 2011 YDRA and a friend installed the same dash in his 2013 YDRA Concierge 4- passenger cart. http://www.justgolfcarts.com/sayadrcuda.html I looked up your adventurer and it appears to be the same. This dash looks good and works out well for us it is nice to have covered storage on either side of the cart. The locking glove boxes are not that secure as they are plastic latches and can be forced open easily so don’t use it to secure valuables. The dash comes with double sided tape to secure it the existing dash area. This didn’t prove to be secure enough so I used two 1/8” pop rivets just inside each glove box door to secure the lower portion of the dash and three ¼” plastic push in fasteners across the top portion to secure the top. http://www.lowes.com/Search=automoti...ive+fasteners#!
The center cup holder portion of the dash in my unit was weathered looking so I refinished it with RustOleum Truck Bed Coating I get at Wal-Mart. Note: the center section of the dash comes out by removing the center screw and just lifting it up and pilling to the rear. After installing the new dash cover the two pointed corners on either side of the hinged area on the cup holder can be difficult to reinstall, so I trimmed them short enough to make reinstallation easier. The reason for this is that access to the electrical components located in the center dash area is under the cup holder. Robert |
12-30-2014, 02:58 PM | #3 |
Not Yet Wild
Join Date: Nov 2014
Location: Houston
Posts: 2
|
Re: Yamaha adventurer 2+2 parts question
excellent feedback thank you.
|
01-03-2015, 08:07 PM | #4 |
Not Yet Wild
Join Date: May 2009
Location: Central Louisiana
Posts: 46
|
Yes all the drive G29 parts will work. I added the locking glove box doors to my 2+2.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha Adventurer One-18hp Vanguard? | Big Block Talk! | |||
Yamaha Adventurer 2+2 | Gas Yamaha | |||
New Adventurer 2+2 | Gas Yamaha | |||
Yamaha Adventurer 1governer | Gas Yamaha | |||
F.S. Ezgo parts and yamaha parts | Golf Carts and Parts |